The level of water resistance of your watch is directly WATER RESISTANCE ..............03 related to the security of the screw-in back cover, which WATCH WITH OS22 6S30 , 6S21 AND 6S11 MOVE MENT S ... 05 is factory sealed:...
Page 4
Recommendation: please have the water resistance of your watch tested once every two years at your servicecentre. Watches with OS22, 6S30, 6S21 Attention: There is some humidity inside the watch and 6S11 movements thus when the outside temperature is lower than (Produced by Citizen Watch Co., Japan)
Page 5
Timing: up to 59 minutes 59 seconds. 1/20 sec chronograph (OS22 ant 6S30 movements). Battery: SR927W. Displays and buttons of OS22 (Pic.1), 6S30 (Pic. 2), 6S21 (Pic. 3), 6S11 (Pic. 4) movements: 1. Second hand of the chronograph. 2. Minute hand.
Page 6
Setting the time 1. Pull the crown out to the 2nd position so that the second hand stops at ZERO position. 2. Turn the crown to set hour and minute hands. 3. When the crown is pushed back to the normal position in synchronization with a time signal, small second hand begins to run.
Page 7
1/20 second united up to maximum of 59 min 59 sec. The 1/20 second chronograph hand keeps moving continuously for 60 seconds (for OS22) or for 30 seconds (for 6S30) after starting and then stops at ZERO position. NOTE: The 1/20 hand is absent in 6S21 and 6S11 movements.
Page 8
When button A is pressed to stop the chronograph, the chronograph 1/20 second hand advances rapidly to display the measured time. 3. Pressing button B resets the chronograph and all hands return to their ZERO positions. * Moving of the 1/20 sec chronograph hand is a demo only.
Page 9
3. Press button B to set the chronograph 1/20 second hand to ZERO position. The chronograph hands can be advanced rapidly by continuously pressing button A or B. 4. Once the hands have been zeroed, reset the time and return the crown to its normal position. 5.
Page 16
Watch with YM86 movement (Produced by S. EPSON, Japan)
Page 23
Watches with 515.24 movement (Produced by RONDA AG, Switzerland)
Page 24
Function: Hours, minutes, seconds. Second time zone indication at 24-hourscale. Battery: SR920SW Minute hand Pos. N: Position of rest (watch running) Pos. 1: Quick-change correction for date 12-hour hand The date can also be corrected during the day- changing phase between 10 pm and midnight. The date of the following day has to be set, because no automatic date change takes place at midnight.
Pos. 2: Setting the time WARRANTY Pull the crown out to position 2 (watch stopped). Turn the crown, until the current time is displayed (remember the 24-hour cycle). The manufacturer warranty period is valid for 24 months from the purchase date. In each country of sale ...
The right for warranty service is provided by the INTERNATIONAL GUARANTEE guarantee certificate attached to the given passport- booklet of your watch. AGENCY The claims on watch replacement or repayment are satisfied upon submission of the certificate from the guarantee service.
Page 27
Repair Coupon Nr. Repair Coupon Nr. Production Number (Model Number) Model Nr. Model Nr. Date of Purchase Date Date Signature Signature (Stores stamp) Repair Coupon Nr. Repair Coupon Nr. Model Nr. Model Nr. Seller Date Date (Name) Signature Signature (Signature)
Need help?
Do you have a question about the OS22 and is the answer not in the manual?
Questions and answers