Summary of Contents for VBUZZER HT-286
-
Page 1: Configuration Guide
Grandstream Gateways & ATA’s HT-286, 502, 503, 701, 702, 704, GWX-4008 & 4004 Configuration Guide Copyright VBuzzer™., 2017... - Page 2 3. Dial 02 and the IP address will be played to you. MANUAL CONFIGURATION Quick Steps 1. Find the IP address of the device and open a web browser to the IP address. 2. Login with the device admin password. Default factory password is admin Copyright VBuzzer™., 2017...
- Page 3 3. Click on the “Basic Settings” option at the top. Your telephones receive their time from the ATA device. Be sure you select the correct time zone below and enter NTP server value (in Advanced Settings): Click Apply. Copyright VBuzzer™., 2017...
- Page 4 4. Click on the “Advanced Settings” option at the top. To prevent your ATA device from receiving direct IP calls (calls not originating through VBuzzer), set the following option to Yes: Disable Direct IP Call = Yes Your telephones receive their time from the ATA device. Be sure you set the...
- Page 5 5. Click on the “FXS Port” option at the top. Primary SIP Server = sip1-on.vbuzzer.com SIP User ID = VBuzzer Account ID (not your username) Authenticate ID = VBuzzer Account ID (not your username) Authenticate Password = VBuzzer Account Password (the long one)
- Page 6 25060 Local RTP port: 25004 To prevent your ATA device from receiving direct IP calls (calls not originating through VoIP Much), set the following option to Yes: Allow Incoming SIP Messages from SIP Proxy Only = Yes Copyright VBuzzer™., 2017...
- Page 7 The remaining settings on this page remain at their default values. Click Apply. 6. Click Reboot Your ATA will reboot and register to the VBuzzer network. Reboot time can be approx. 1 to 2 minutes. Copyright VBuzzer™., 2017...
Need help?
Do you have a question about the HT-286 and is the answer not in the manual?
Questions and answers