Specifications - Yamaha NS-P270 Service Manual

G SW-P270
Type .............. Advanced Yamaha Active Servo Technology
Output Power ............ 50 W (100 Hz, 5 ohms , 10 % THD)
Dynamic Power .......................................... 100 W, 5 ohms
Input Impedance .......................... INPUT (PJ): 12 k-ohms
Frequency Response ............................. 30 Hz to 200 Hz
Driver
Woofer ................................... 16 cm (6-5/16") cone x 1
Input Section ................................................ RCA pin jack
Operation Section ............. Power switch, Volume control,
Power Supply
U, C models ......................................... AC 120 V, 60 Hz
R, T, K, L models ..... AC 110–120/220–240 V, 50/60 Hz
A model ............................................... AC 240 V, 50 Hz
B, G models ......................................... AC 230 V, 50 Hz
Power Consumption
U, C, R, T, K, A, B, G, L models ............................ 40 W
Dimensions (W x H x D) .... 200 mm x 365 mm x 370 mm
Weight ............................................ 8.5 kg (18 lbs. 12 oz.)
Finish
Black color ........................... U, C, R, A, B, G, L models
Silver color ................... U, C, R, T, K, A, B, G, L models
G DIMENSIONS
M NX-C270
300 (11-13/16")
M NX-E270
105 (4-1/8")
Magnetic shielding type
Power indicator
(7-7/8" x 14-3/8" x 14-9/16")
113 (4-7/16")
Unit : mm (inch)
Holes
113 (4-7/16")
Unit : mm (inch)
G Accessories
NS-P270 .................................... Subwoofer cable (3m) x 1
Nonskid pad x 4 (for SW-P270)
Nonskid pad x 16 (for NX-E270)
NS-P276 ..................................... Subwoofer cable (3m) x 1
Nonskid pad x 4 (for SW-P270)
Nonskid pad x 24 (for NX-E270)
* Specifications subject to change without notice.
U ....... USA model
C ....... Canadian model
R ....... General model
T ....... Chinese model
K ....... Korean model
Advanced YST
Advanced Yamaha Active Servo Technology is a
unique system to let the speaker unit have a perfectly
linear motion by the speaker and amplifier
combination.
A screw with a diameter of
4 mm (5/32") can be used.
[Hole depth: 10 mm (13/32")]
NS-P270/NS-P276
Speaker cable (10 m) x 2
Speaker cable (4 m) x 3
Fastener x 2 (for NX-C270)
Speaker cable (10 m) x 3
Speaker cable (4 m) x 3
Fastener x 2 (for NX-C270)
A ....... Australian model
B ....... British model
G ....... European model
L ....... Singapore model
5