Table of Contents
Advertisement
Before washing for the first time
Wash once without any laundry –> page 9.
Sorting and loading laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load –> page 7.
Observe the important information –> page 6.
Insert large and small items of laundry.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door and the rubber seal.
Add detergent and care products
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
our liquid detergent into the appropriate dispenser and place in the drum.
Dilute thick fabric softener and fabric conditioner with water.
This prevents blockages.
Setting** and adjusting programmes
**If the
display panel, the childproof lock
Programme selector
is active –> deactivate, page 5.
Additional function and options
buttons –> Individual settings,
page 5.
If the buttons are held for longer,
the appliance automatically runs
through the setting options.
Select
Programme selector for
switching the machine on
and off and for selecting
the programme. Can be
turned in either direction.
Downloaded From WashingMachine-Manual.com Manuals
Measure accordingly:
1
symbol flashes in the
2
(Start/Pause)
Washing
Detergent drawer with
compartments I, II,
Drum
Control panel
Washing machine
door
Service flap
Washing
3
Removing the washing
Open the washing machine door and remove the washing.
If - - - - ("ohne Endschleudern" without final spin) is active:
Turn the programme selector to
the spin speed.
Select
(Start/Pause).
– Remove any foreign objects - risk of rusting.
– Leave the washing machine door and detergent
drawer open so that any residual water can
evaporate.
Turning the tap off
Not required for HydroSafe models –> Refer to installation
instructions
Switching off
Turn the programme selector to
End of programme when ...
... the status indicator
(Spin) flashes and
(End) appears in the display panel.
Interrupting the programme
Programmes at high temperatures:
3
– Cool washing: Select
/
Spin).
– Select
(Start/Pause).
Programmes at lower temperatures:
–
/
/
(Rinse/Spin) (deactivate
(Rinse plus)) or select
– Select
(Start/Pause).
Changing the programme, if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Select
(Start/Pause). The new programme starts
from the beginning.
(Drain) or select
. (Off).
/
(Rinse/
(Drain).
4
Advertisement
Table of Contents
