Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Mako Manuals
  4. Grinder
  5. SROM 1183
  6. Instruction manual

Mako SROM 1183 Instruction Manual

115mm angle grinder
Hide thumbs

Advertisement

Quick Links

Instruction Manual
115mm ANGLE GRINDER
Model SROM 1183
Our tool range has you covered for DIY. Whatever the job, make light work of
it with MAKO tools.

Advertisement

loading
Need help?

Need help?

Do you have a question about the SROM 1183 and is the answer not in the manual?

Questions and answers

Summary of Contents for Mako SROM 1183

  • Page 1 Instruction Manual 115mm ANGLE GRINDER Model SROM 1183 Our tool range has you covered for DIY. Whatever the job, make light work of it with MAKO tools.
  • Page 2 PRODUCT FEATURES: 1. Spindle Lock 2. On/Off Switch 3. Wheel Guard 4. Grinding Wheel 5. Auxiliary Handle 6. Clamping Nut 7. Mounting Flange 8. Wheel Guard Adjustment Screw 9. Wheel Guard Latch...
  • Page 3 Mako 2 Year DIY Warranty: All Mako Power Tools are backed by a comprehensive 2 year DIY warranty. If for any reason you experience a fault with this power tool, please contact the retailer that it was purchased from, present the receipt and warranty card (at the back of the operating manual), for a full refund or replacement.

  • Page 4: Table Of Contents

    Electrical Safety o Personal Safety o Power Tool Use and Care o Service  Angle Grinder Safety Instructions  Mako Angle Grinder Operating Instructions o Assembly o Operation o Maintenance & Cleaning  Mako Angle Grinder Technical Data Description of symbols: Please read all of the safety and operating instructions carefully before using this Angle Grinder.

  • Page 5: Work Area Safety

    GENERAL SAFETY INSTRUCTIONS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

  • Page 6: Power Tool Use And Care

    g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
  • Page 7 not match the mounting hardware of the power tool will run out of balance, vibrate excessively and may cause loss of control. g) Do not use a damaged accessory. Before each use inspect the accessory such as abrasive wheels for chips and cracks, backing pad for cracks, tear or excess wear, wire brush for loose or cracked wires.
  • Page 8 d) Use special care when working corners, sharp edges etc. Avoid bouncing and snagging the accessory. Corners, sharp edges or bouncing have a tendency to snag the rotating accessory and cause loss of control or kickback. e) Do not attach a saw chain woodcarving blade or toothed saw blade. Such blades create frequent kickback and loss of control.

  • Page 9: Mako Angle Grinder Operating Instructions

    MAKO ANGLE GRINDER OPERATING INSTRUCTIONS: WARNING: Before setting up Angle Grinder for use, ensure that the plug is disconnected from the power source, taking into consideration general safety precautions.
  • Page 10 After mounting the grinding disc, and before switching the grinder on, check that the grinding disc is correctly mounted and that it can rotate freely. Switching On and Off:  To start the Angle Grinder, press and slide the ON/OFF switch (2) forward. ...

  • Page 11: No-Load Speed

    Technical Data: ANGLE GRINDER SROM1183 Voltage Rating 230-240V, 50Hz Input Power 900W No-load Speed n 12000min Spindle Thread Max grinding wheel 115 mm...