Page 2
Welcome to the world of TRNDlabs products! TRNDlabs products are design focused electronics, engineered to combine ultimate performance and aesthetics. WWW.TRNDLABS.COM...
SPECIFICATIONS Weight 59 grams (2.08 ounces) Size 100 mm (l) x 62 mm (w) Capacity 2500 mAh...
Page 6
. Now connect the Micro USB plug of the USB Charging Cable to the Micro USB port of your BEAM . The blinking LED light indicates the BEAM Powerbank is charging. When the battery is fully charged, the LED light turns green.
Page 7
CONNECTING To connect BEAM to a mobile device, simply connect the Micro USB plug of BEAM to the mobile device. For an iOS device, apply the additional iOS Micro USB Adapter onto the Micro USB plug and connect it with...
TROUBLESHOOTING BEAM is not charging? Charging often interrupted? The charging cable is not The charging current is inserted properly. too much (over-current protection). BEAM is already fully charged. Reconnect BEAM...
SAFETY PRECAUTIONS • Do not use BEAM in temperatures below -20 °C or above 40 °C or in a humidity higher than 85%. • Place BEAM at room temperature when charging. • Store BEAM in a dry place. Never store it somewhere moist.
FCC INFORMATION This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Need help?
Do you have a question about the BEAM and is the answer not in the manual?
Questions and answers