Clas Ohlson XYLB-80L Instruction Manual

String Lights
Art.no 36-5350
36-5351
36-5352
Please read the entire instruction manual before using the product and save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to technical data.
If you have any questions regarding technical problems please contact our Customer Services.
Safety
• Observe the correct polarity when inserting the batteries.
• Never mix old and new batteries.
• Use alkaline batteries only.
• Batteries should only be replaced by an adult.
• Never attempt to recharge non-rechargeable batteries.
• Do not leave discharged batteries inside the product.
• Always remove the batteries if the product is not to be used for a long time.
• The batteries can leak or explode if used incorrectly.
Product description
Battery-Operated LED String Lights
Easy to set up. Not dependant on a power point. Automatic on/off. For indoor or outdoor use. IP44.
Inserting batteries
1. Unscrew the cover and insert 4 × AA/LR6 batteries. Refer to the markings in the battery compartment.
2. Refit the battery cover and screw it on tight.
Operating instructions
1. Turn the lights on by pressing [ ON ]. The lights will come on for 6 hours and then automatically go
off and the string lights will enter standby mode for 18 hours. After 18 hours, the lights will come on
again automatically.
2. If you wish the lights to remain on after 6 hours, press [ ON ] again. The lights will then begin a new
time cycle.
3. Press [ OFF ] to turn the lights off.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local authority.
GREAT BRITAIN • CUSTOMER SERVICE
tel: 08545 300 9799 internet: www.clasohlson.com/uk
e-mail customerservice@clasohlson.co.uk
Model XYLB-40L
XYLB-80L
XYLB-120L