Call Settings - Huawei F610 User Manual

Call settings

Call forwarding
When you cannot answer the phone or you want to forward all calls, you can use this
function to set up the options. In this menu you can select to:
1. Set the destination for calls if you are busy.
2. Set the destination for calls if you are not reachable (e.g. phoned turned off
or out of coverage).
3. Set the destination for calls if you do not answer the phone.
Call waiting
• If the function is activated you will be alerted during a call in progress that another caller
is attempting to reach you. The alert will be a single "beep" tone.
• The call waiting can be engaged by pressing
caller by again pressing
• By pressing the left function key and therefore choosing Options, the two calls can be
swapped, transferred, ended, a new call made by dialling the number pad or chosen
from the Contact list. Also, callers can be brought together into a conference setting by
choosing Conference call.
Calling ID
This function allows you to send or hide your calling ID. Choosing Auto will allow the
number dialled to see your CLI (caller line identity).
Minute alert
If the function is activated, your device notifies you of the call duration by giving an alert
several seconds before the end of each minute.
V5102C00310-One Net Desk Phone Guide-EH-V7.indd 16
. You can then revert to the original
. If you press , both calls will end.
16
25/04/2012 15:47