Page 2
Thank you for purchasing the Sangoma A200 card! Please follow these instructions to begin using your new card. 1. INSTALL YOUR PBX SOFTWARE Install your choice of supported software. (e.g., Asterisk , FreeSWITCH, Yate, CallWeaver, etc.) ® See the list of compatible software at: http://www.sangoma.com/products_and_solutions/compatible_software...
Page 3
Fasten PCI bracket to chassis. Server 3. INSTALL THE DRIVERS (WANPIPE ® Visit wiki.sangoma.com for the latest drivers and instructions. You're done! Enjoy your new card. SYNCHRONIZE FOR FAX (PATENT PENDING) Your A200 Card is fax synchronization ready.
Page 4
(e.g., JP6 on a 4-connector backplane.) Main Card Install up to 6 Backplane additional Remora™ expansion cards (24 ports in total) Port 4 Port 3 Port 2 Port 1 Recommended Confi guration Only Full product specifi cations available at SANGOMA.COM...
Page 5
If you are unsure of how to upgrade your firmware/flash your card, detailed instructions are provided on wiki.sangoma.com. LIFETIME WARRANTY New Sangoma A-Series hardware comes with a lifetime warranty for replacement and repair from the date of purchase. This includes a no-questions-asked 30-day money back guarantee, Sangoma's renowned free technical support, and free replacement in the unlikely event of a defect.
Page 6
CONTACT US INTERNATIONAL +1 905 474 1990 EMAIL techdesk@sangoma.com TOLL FREE IN N. AMERICA 1 800 388 2475 WIKI wiki.sangoma.com Let us know whether this manual was helpful – your feedback is appreciated!
Need help?
Do you have a question about the A200 Analog and is the answer not in the manual?
Questions and answers