LG FM776F Service Manual page 10

4. TOTAL CHASSIS ASSEMBLY REMOVAL
1) Disconnect P902 (Degaussing pin),
P704 (DY pin), P502, P501 and P701
from the Main PCB.
2) Disconnect P401.
3) Disconnect eight connects (a).
4) Carefully separate the CDT Board
Assembly from the CDT neck.
5) Discharge the remaining static
electricity by shorting between
the Anode Cap and the CDT ground.
6) Disconnect the Anode Cap
from the CDT.
7) Disconnect P801, P802, P803, P804.
8) Remove the screw (b).
9) Remove the MIC Phone Assembly.
10) Remove two screws (c).
11) Remove the Total Chassis Assembly
from the Main Frame.
5. VIDEO PCB ASSEMBLY & AUDIO ASSEMBLY REMOVAL
1) Remove three screws (a).
2) Disconnect P1, P2, P3.
3) Remove the Audio Assembly.
4) Remove three screws (a).
5) Disconnect P301, P302, and Pin (b).
6) Remove the Video PCB Assembly.
(b)
P801
P802
P803
P804
(a)
P201
(b)
(b)
P702
P403
P402
P904
- 10 -
(a)
(c)
P701
P704
P902
P401
P502
P501
(a)
(c)
P301
P302
(a)
(b)
P1
P3
P2
(a)
(a)