Summary of Contents for TigerTough Group 62307
- Page 1 INSTALLATION GUIDE 62307 40/20/40 With Underseat Storage CHEVROLET SILVERADO (2014-2017) GMC SIERRA (2014-2017)
- Page 2 BILL OF MATERIALS ITEM QUANTITY Driver Seat Back Cover Driver Seat Bottom Cover Passenger Seat Back Cover Passenger Seat Bottom Cover Console Back Cover Console Bottom Cover Seat Headrest Cover Seat Backs & Bottoms have tag signifying Driver or Passenger. Ensure airbag patch (same side as the TigerTough tag) goes on the outside edge of the seat.
- Page 3 1 - Preparation q 1.1 - Remove headrest by pressing in tabs at base of headrest and pulling up q 1.2 - Slide seat forward and raise to highest position, if possible. 2 - Install Seat Back Cover q 2.1 - Unhook both elastic straps from under the seat bottom to release the seat back flap. q 2.2 - Lean seat back forward.
- Page 4 3 - Install Seat Bottom Cover Seat cover string between seat bottom and plastic trim, where back and bottom meet. q 3.1 - Put cover over seat bottom. q 3.2 - Tuck cover behind plastic trim around seat. The seams in the cover will line up with seat seams. q 3.3 - Tuck outside string between seat bottom and trim, where the back and bottom meet.
- Page 5 4 - Install Headrest Cover q 4.1 - Put headrest back in seat by pressing plastic tabs and pushing down on headrest. q 4.2 - Pull cover over head rest with “loop” Velcro in front and “hook” Velcro in rear. q 4.3 - Fasten Velcro tabs together under headrest.
Need help?
Do you have a question about the 62307 and is the answer not in the manual?
Questions and answers