Advertisement

Quick Links

Version 1.0
Published November 2016
Copyright©2016 ASRock INC. All rights reserved.

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners' benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate"
ASRock Website: http://www.asrock.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the H270 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Fatal1ty H270

  • Page 1: Copyright Notice

    Version 1.0 Published November 2016 Copyright©2016 ASRock INC. All rights reserved. Copyright Notice: No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.
  • Page 2 AUSTRALIA ONLY Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage caused by our goods. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
  • Page 3 2004, I became the World’s 1st Doom3 Champion by defeating Daler in a series of very challenging matches and earning $25,000 for the victory. Since then Fatal1ty has traveled the globe to compete against the best in the world, winning prizes and acclaim, including the 2005 CPL World Tour Championship in New York City for a $150,000 first place triumph.
  • Page 4 Fatal1ty Brand products represent. Johnathan “Fatal1ty” Wendel The Fatal1ty name, Fatal1ty logos and the Fatal1ty likeness are registered trademarks of Fatal1ty, Inc., and are used under license. © 2014 Fatal1ty, Inc. All rights reserved. All other trademarks are the property of their respective...
  • Page 5: Motherboard Layout

    Fatal1ty H270 Performance Series Motherboard Layout ATX12V1 CPU_FAN1 M2_3 HDMI1 USB 3.0 Top: T: USB3_TA_1 RJ-45 B: USB3_TC_1 USB 3.0 T: USB1 B: USB2 CHA_FAN2 PCI Express 3.0 RoHS PCIE1 PCIE2 CLRMOS1 Intel CMOS FATAL Battery H270 PCIE3 H270 Performance...
  • Page 6 No. Description ATX 12V Power Connector (ATX12V1) CPU Fan Connector (CPU_FAN1) 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1) 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2) ATX Power Connector (ATXPWR1) USB 3.0 Header (USB3_5_6) USB 3.0 Header (USB3_3_4) SATA3 Connectors (SATA_4_5) SATA3 Connectors (SATA_2_3) SATA3 Connectors (SATA_0_1) System Panel Header (PANEL1)
  • Page 7 Fatal1ty H270 Performance Series I/O Panel No. Description No. Description PS/2 Mouse/Keyboard Port (PS2_KB1) USB 3.0 Ports (USB3_1_2) D-Sub Port (VGA1) USB 3.0 Type-A Port (USB3_TA_1) LAN RJ-45 Port* USB 3.0 Type-C Port (USB3_TC_1) Central / Bass (Orange) HDMI Port (HDMI1)
  • Page 8 * There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications. ACT/LINK LED SPEED LED LAN Port Activity / Link LED Speed LED Status Description Status Description No Link 10Mbps connection Blinking Data Activity Orange...
  • Page 9: Chapter 1 Introduction

    Fatal1ty H270 Performance Series Chapter 1 Introduction Thank you for purchasing ASRock Fatal1ty H270 Performance Series motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.
  • Page 10: Specifications

    • Digi Power design • 8 Power Phase design • Supports Intel® Turbo Boost 2.0 Technology Chipset • Intel® H270 Memory • Dual Channel DDR4 Memory Technology • 4 x DDR4 DIMM Slots • Supports DDR4 2400/2133 non-ECC, un-buffered memory* Gen Intel®...
  • Page 11 Fatal1ty H270 Performance Series • Gen9 LP, DX11.3, DX12 • HWAEncode/Decode: VP8, HEVC 8b, VP9, HEVC 10b (For Gen Intel® CPU) • HWA Encode/Decode: VP8 , HEVC 8b; GPU/SWEncode/ Decode: VP9, HEVC 10b (For 6th Gen Intel® CPU) • Max. shared memory 1024MB * The size of maximum shared memory may vary from different operating systems.
  • Page 12 • 1 x Optical SPDIF Out Port • 1 x USB 2.0 Port (Supports ESD Protection (ASRock Full Spike Protection)) • 1 x Fatal1ty Mouse Port (USB 2.0) (Supports ESD Protection (ASRock Full Spike Protection)) • 3 x USB 3.0 Type-A Ports (Supports ESD Protection (ASRock Full Spike Protection)) • 1 x USB 3.0 Type-C Port (Supports ESD Protection (ASRock...
  • Page 13 Fatal1ty H270 Performance Series Connector • 1 x COM Port Header • 1 x TPM Header • 1 x Chassis Intrusion Header • 1 x Power LED and Speaker Header • 1 x CPU Fan Connector (4-pin) * The CPU Fan Connector supports the CPU fan of maximum 1A (12W) fan power.
  • Page 14 • Fan Multi-Speed Control: CPU, Chassis, Chassis Optional/ Water Pump Fans • CASE OPEN detection • Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore, DRAM, VPPM, PCH 1.0V, VCCSA, VCCST • Microsoft® Windows® 10 64-bit (For 7 Gen Intel® CPU) • Microsoft® Windows® 10 64-bit / 8.1 64-bit / 7 32-bit / 7 64- bit (For 6 Gen Intel®...
  • Page 15: Chapter 2 Installation

    Fatal1ty H270 Performance Series Chapter 2 Installation This is an ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings.
  • Page 16: Installing The Cpu

    2.1 Installing the CPU 1. Before you insert the 1151-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found.
  • Page 17 Fatal1ty H270 Performance Series...
  • Page 18 Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.
  • Page 19 Fatal1ty H270 Performance Series 2.2 Installing the CPU Fan and Heatsink...
  • Page 20: Dual Channel Memory Configuration

    2.3 Installing Memory Modules (DIMM) This motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots, and supports Dual Channel Memory Technology. 1. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 DIMM pairs. 2.
  • Page 21 Fatal1ty H270 Performance Series...
  • Page 22 2.4 Expansion Slots (PCI Express Slots) There are 6 PCI Express slots on the motherboard. Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.
  • Page 23: Jumpers Setup

    Fatal1ty H270 Performance Series 2.5 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”...
  • Page 24: Onboard Headers And Connectors

    2.6 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard. System Panel Header Connect the power PLED+ PLED-...
  • Page 25 Fatal1ty H270 Performance Series Power LED and Speaker Please connect the SPEAKER DUMMY Header chassis power LED and DUMMY (7-pin SPK_PLED1) the chassis speaker to this (see p.1, No. 12) header. PLED+ PLED+ PLED- Serial ATA3 Connectors These six SATA3...
  • Page 26 Front Panel Audio Header This header is for PRESENCE# MIC_RET (9-pin HD_AUDIO1) connecting audio devices OUT_RET (see p.1, No. 22) to the front audio panel. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must sup- port HDA to function correctly.
  • Page 27 Fatal1ty H270 Performance Series CPU Fan Connector This motherboard pro- FAN_SPEED_CONTROL FAN_SPEED (4-pin CPU_FAN1) vides a 4-Pin CPU fan FAN_VOLTAGE (see p.1, No. 2) (Quiet Fan) connector. If you plan to connect a 3-Pin CPU fan, please connect it to Pin 1-3.
  • Page 28 Chassis Intrusion Header This motherboard sup- (2-pin CI1) ports CASE OPEN (see p.1, No. 21) detection feature that Signal detects if the chassis cover has been removed. This feature requires a chassis with chassis intrusion detection design. Serial Port Header This COM1 header RRXD1 DDTR#1...
  • Page 29 Fatal1ty H270 Performance Series 2.7 M.2 WiFi/BT Module Installation Guide The M.2 Socket (Key E) supports type 2230 WiFi/BT module. Installing the WiFi/BT module Step 1 Prepare a type 2230 WiFi/BT module and the screw. Step 2 Find the nut location to be used.
  • Page 30 Step 4 Tighten the screw with a screwdriver to secure the module into place. Please do not overtighten the screw as this might damage the module.
  • Page 31 Fatal1ty H270 Performance Series 2.8 M.2_SSD (NGFF) Module Installation Guide The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2 Socket (M2_1 and M2_2) supports SATA3 6.0 Gb/s module and M.2 PCI Express module...
  • Page 32 Step 3 Move the standoff based on the module type and length. The standoff is placed at the nut location D by default. Skip Step 3 and 4 and go straight to Step 5 if you are going to use the default nut. Otherwise, release the standoff by hand.
  • Page 33 Fatal1ty H270 Performance Series M.2_SSD (NGFF) Module Support List Vendor Size Interface Length ADATA 128GB SATA3 2280 AXNS381E-128GM-B ADATA 256GB SATA3 2280 AXNS381E-256GM-B ADATA 32GB SATA3 2230 AXNS330E-32GM-B Crucial 120GB SATA3 2280 CT120M500SSD4 Crucial 240GB SATA3 2280 CT240M500SSD4 Intel 80GB...
  • Page 34 1 Einleitung Vielen Dank, dass Sie sich für die Fatal1ty H270 Performance Series von ASRock entschieden haben – ein zuverlässiges Motherboard, das konsequent unter der strengen Qualitätskontrolle von ASRock hergestellt wurde. Es liefert ausgezeichnete Leistung mit robustem Design, das ASRock Streben nach Qualität und Beständigkeit erfüllt.
  • Page 35: Technische Daten

    Fatal1ty H270 Performance Series 1.2 Technische Daten Plattform • ATX-Formfaktor Prozessor • Unterstützt Intel®-Core -i7/i5/i3/Pentium®/Celeron®-Prozessoren der 7. und 6. Generation (Sockeö 1151) • Digi Power design • 8-Leistungsphasendesign • Unterstützt Intel® Turbo Boost 2.0-Technologie • Unterstützt CPUs mit freiem Multiplikator der Intel® K-Serie • Unterstützt ASRock BCLK-Übertaktung (voller Bereich)
  • Page 36 • Unterstützt integrierte Intel® HD Graphics-Visualisierung: Intel® Quick Sync Video mit AVC, MVC (S3D) und MPEG-2 Full HW Encode1, Intel® InTru 3D, Intel® Clear Video HD Technology, Intel® Insider , Intel® HD Graphics • Gen9 LP, DX11.3, DX12 • HWA encodieren/decodieren: VP8, HEVC 8b, VP9, HEVC 10b (bei Intel®-Prozessor der 7.
  • Page 37 • 1 x Optischer SPDIF-Ausgang • 1 x USB 2.0-Port (unterstützt Schutz gegen elektrostatische Entladung (ASRock Full Spike Protection)) • 1 x Fatal1ty-Mausport (USB 2.0) (unterstützt Schutz gegen elektrostatische Entladung (ASRock Full Spike Protection)) • 3 x USB 3.0-Typ-A-Ports (unterstützt Schutz gegen elektrostatische Entladung (ASRock Full Spike Protection)) • 1 x USB 3.0-Typ-C-Port (unterstützt Schutz gegen...
  • Page 38 * Wenn M2_1 durch ein SATA-Typ-M.2-Gerät belegt ist, wird SATA_5 deaktiviert. * Wenn M2_2 durch ein SATA-Typ-M.2-Gerät belegt ist, wird SATA_0 deaktiviert. • 2 x Ultra-M.2-Sockel, unterstützt 2230-/2242-/2260-/2280-M.2-SATA-III-6,0-Gb/s-Modul und M.2-PCI-Express-Modul bis Gen3 x 4 (32 Gb/s)** ** Unterstützt Intel® Optane -Technologie ** Unterstützt NVMe-SSD als Bootplatte ** Unterstützt ASRock U.2-Kit...
  • Page 39 Fatal1ty H270 Performance Series BIOS-Funktion • AMI-UEFI-Legal-BIOS mit Unterstützung mehrsprachiger grafis- cher Benutzerschnittstellen • ACPI 6,0-konforme Aufweckereignisse • SMBIOS 2.7-Unterstützung • CPU, GT_CPU, DRAM, VPPM, PCH 1,0V, VCCIO, VCCST, VCCSA, VCCPLL Mehrfachspannungsanpassung Hardware- • CPU- / Gehäuse- / Optionales-Gehäuse-/Wasserpumpen-Temper- überwachung aturerkennung • CPU- / Gehäuse- / Optionales-Gehäuse-/Wasserpumpen-Lüftert-...
  • Page 40 1.3 Jumpereinstellung Die Abbildung zeigt, wie die Jumper eingestellt werden. Wenn die Jumper-Kappe auf den Kontakten angebracht ist, ist der Jumper „kurzgeschlossen“. Wenn keine Jumper- Kappe auf den Kontakten angebracht ist, ist der Jumper „offen“. Die Abbildung zeigt einen 3-poligen Jumper, dessen Kontakt 1 und Kontakt 2 „kurzgeschlossen“ sind, wenn eine Jumper-Kappe auf diesen 2 Kontakten angebracht ist.
  • Page 41 Fatal1ty H270 Performance Series 2.6 Integrierte Stiftleisten und Anschlüsse Integrierte Stiftleisten und Anschlüsse sind KEINE Jumper. Bringen Sie KEINE Jumper-Kappen an diesen Stiftleisten und Anschlüssen an. Durch Anbringen von Jumper-Kappen an diesen Stiftleisten und Anschlüssen können Sie das Motherboard dauerhaft beschädigen.
  • Page 42 Betrieb-LED- und Bitte verbinden Sie die Be- SPEAKER DUMMY Lautsprecher-Stiftleiste trieb-LED des Gehäuses und den DUMMY (7-polig, SPK_PLED1) Gehäuselautsprecher mit dieser (siehe S. 1, Nr. 12) Stiftleiste. PLED+ PLED+ PLED- Serial-ATA-III-Anschlüsse Diese sechs SATA-III-Anschlüsse (SATA_4_5: unterstützen SATA-Datenkabel siehe S. 1, Nr. 8) für interne Speichergeräte mit (SATA_2_3: einer Datenübertragungsgeschwi...
  • Page 43 Fatal1ty H270 Performance Series Audiostiftleiste Diese Stiftleiste dient PRESENCE# MIC_RET (Frontblende) dem Anschließen von OUT_RET (9-polig, HD_AUDIO1) Audiogeräten an der (siehe S. 1, Nr. 22) Frontblende. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. High Definition Audio unterstützt Anschlusserkennung, der Draht am Gehäuse muss dazu jedoch HDA unterstützt.
  • Page 44 CPU-Lüfteranschlüsse Dieses Motherboard bietet FAN_SPEED_CONTROL FAN_SPEED (4-polig, CPU_FAN1) einen 4-poligen CPU-Lüfter- FAN_VOLTAGE (siehe S. 1, Nr. 2) anschluss (lautloser Lüfter). Falls Sie einen 3-poligen CPU- Lüfter anschließen möchten, verbinden Sie ihn bitte mit Kontakt 1 bis 3. ATX-Netzanschluss Dieses Motherboard bietet (24-polig, ATXPWR1) einen 24-poligen ATX-Net- (siehe S.
  • Page 45 Fatal1ty H270 Performance Series Gehäuseeingriff-Stiftleiste Dieses Motherboard (2-polig, CI1) unterstützt die Gehäuse-off- (siehe S. 1, Nr. 21) en-Erkennung, die erkennt, Signal wenn die Gehäuseabdeckung entfernt wurde. Diese Funk- tion setzt ein Gehäuse mit Gehäuseeingrifferkennungs- design voraus. Serieller-Port-Stiftleiste Diese COM1-Stiftleiste RRXD1...
  • Page 46 Site Internet ASRock http://www.asrock.com. 1.1 Contenu de l’emballage • Carte mère ASRock FFatal1ty H270 Performance Series (facteur de forme ATX) • Guide d'installation rapide pour la série ASRock Fatal1ty H270 Performance • CD de support pour la série ASRock Fatal1ty H270 Performance • 1 x panneau de protection E/S...
  • Page 47 Fatal1ty H270 Performance Series 1.2 Spécifications Plateforme • Facteur de forme ATX ème ème Processeur • Prend en charge les 7 et 6 Générations de processeurs Intel® Core i7/i5/i3/Pentium®/Celeron® (Socket 1151) • Digi Power design • Alimentation à 8 phases • Prend en charge la technologie Intel®...
  • Page 48 • Prend en charge la technologie Intel® HD Graphics Built-in Visuals : Intel® Quick Sync Video avec AVC, MVC (S3D) et MPEG-2 Full HW Encode1, Intel® InTru 3D, Intel® Clear Video HD Technology, Intel® Insider , Intel® HD Graphics • Gen9 LP, DX11.3, DX12 • Codage/Décodage HWA : VP8, HEVC 8b, VP9, HEVC 10b (Pour ème la 7...
  • Page 49 • 1 x port USB 2.0 (Protection contre les décharges électrostatiques (Protection complète contre les pics ASRock)) • 1 x ports souris Fatal1ty (USB 2.0) (Protection contre les décharges électrostatiques (Protection complète contre les pics ASRock)) • 3 x ports USB 3.0 type A (Protection contre les décharges électrostatiques (Protection complète contre les pics ASRock))
  • Page 50 • 2 x socket Ultra M.2, prend en charge les modules M.2 SATA3 6,0 Gb/s type 2230/2242/2260/2280 et M.2 PCI Express jusqu'à Gen3 x4 (32 Gb/s)** ** Prend en charge Intel® Optane Technology ** Prend en charge les SSD NVMe comme disques de démarrage ** Prend en charge le kit ASRock U.2 Connecteur • 1 x embase pour port COM...
  • Page 51 Fatal1ty H270 Performance Series Caractéris- • BIOS UEFI AMI avec prise en charge d’interface graphique multi- tiques du BIOS lingue • Compatible ACPI 6,0 Wake Up Events • Compatible SMBIOS 2.7 • Réglage de la tension CPU, GT_CPU, DRAM, VPPM, PCH 1,0V,...
  • Page 52 1.3 Configuration des cavaliers (jumpers) L’illustration ci-dessous vous renseigne sur la configuration des cavaliers (jumpers). Lorsque le capuchon du cavalier est installé sur les broches, le cavalier est « court- circuité ». Si le capuchon du cavalier n’ e st pas installé sur les broches, le cavalier est « ouvert ».
  • Page 53 Fatal1ty H270 Performance Series 2.6 Embases et connecteurs de la carte mère Les embases et connecteurs situés sur la carte NE SONT PAS des cavaliers. Ne placez JAMAIS de capuchons de cavaliers sur ces embases ou connecteurs. Placer un capuchon de cavalier sur ces embases ou connecteurs endommagera irrémédiablement votre carte mère.
  • Page 54 Prise DEL d’alimentation et Veuillez brancher la DEL SPEAKER DUMMY haut-parleur d'alimentation du châssis et DUMMY (SPK_PLED1 à 7 broches) le haut-parleur du châssis (voir p.1, No. 12) sur ce connecteur. PLED+ PLED+ PLED- Connecteurs Serial ATA3 Ces six connecteurs SATA3 (SATA_4_5: sont compatibles avec les voir p.1, No.
  • Page 55 Fatal1ty H270 Performance Series Embase audio du panneau Cette embase sert au PRESENCE# MIC_RET frontal branchement des appareils OUT_RET (HD_AUDIO1 à 9 audio au panneau audio broches) frontal. OUT2_L J_SENSE (voir p.1, No. 22) OUT2_R MIC2_R MIC2_L 1. L’ a udio haute définition prend en charge la technologie Jack Sensing (détection de la fiche), mais le panneau grillagé...
  • Page 56 Connecteurs du Cette carte mère est dotée d’un FAN_SPEED_CONTROL ventilateur du processeur connecteur pour ventilateur FAN_SPEED FAN_VOLTAGE (CPU_FAN1 à 4 broches) de processeur (Quiet Fan) à 4 (voir p.1, No. 2) broches. Si vous envisagez de connecter un ventilateur de processeur à...
  • Page 57 Fatal1ty H270 Performance Series Embase d’intrusion châssis Cette carte mère prend en (CI1 à 2 broches) charge la fonction de détection (voir p.1, No. 21) CHASSIS OUVERT qui alerte Signal l’utilisateur en cas de retrait du boîtier du châssis. Cette fonction requiert un châssis...
  • Page 58 È possibile trovare l'elenco di schede VGA più recenti e di supporto di CPU anche sul sito Web di ASRock. Sito Web di ASRock http://www.asrock.com. 1.1 Contenuto della confezione • Scheda madre ASRock Fatal1ty H270 Performance (Form Factor ATX) • Guida all'installazione rapida di ASRock Fatal1ty H270 Performance • CD di supporto ASRock Fatal1ty H270 Performance • 1 x mascherina metallica posteriore I/O...
  • Page 59 Fatal1ty H270 Performance Series 1.2 Specifiche Piattaforma • Fattore di forma ATX • Supporta processori 7 and 6 Generation Intel® Core i7/i5/i3/ Pentium®/Celeron® (Socket 1151) • Digi Power design • Potenza a 8 fasi • Supporta la tecnologia Intel® Turbo Boost 2.0 • Supporto di CPU unlocked Intel®...
  • Page 60 • Supporta la videografica integrata della scheda video HD Intel®: Intel® Quick Sync Video con AVC, MVC (S3D) e MPEG-2 Full HW Encode1, Intel® InTru 3D, Intel® Clear Video HD Technology, Intel® Insider , Intel® HD Graphics • Gen9 LP, DX11.3, DX12 • Codifica/decodifica HWA: VP8, HEVC 8b, VP9, HEVC 10b (per 7 Gen Intel®...
  • Page 61 • 1 x Porta USB 2.0 (supporto protezione da scariche elettrostatiche (ESD) (protezione completa ASRock dai picchi di corrente)) • 1 x Porta mouse Fatal1ty (USB 2.0) (supporto protezione da scariche elettrostatiche (ESD) (protezione completa ASRock dai picchi di corrente)) • 3 x porte USB 3.0 di tipo A (supporto protezione da scariche...
  • Page 62 * Se M2_1 è occupato da un dispositivo M.2 di tipo SATA, SATA_5 sarà disabilitato. * Se M2_2 è occupato da un dispositivo M.2 di tipo SATA, SATA_0 sarà disabilitato. • 2 x Socket Ultra M.2, supporta il modulo M.2 SATA3 6,0 Gb/s di tipo 2230/2242/2260/2280 ed il modulo M.2 PCI Express fino a Gen3 x4 (32 Gb/s)** ** Supporta la tecnologia Intel®...
  • Page 63 Fatal1ty H270 Performance Series BIOS Carat- • AMI UEFI Legal BIOS con interfaccia di supporto multilingue teristiche • Eventi di riattivazione conformi a ACPI 6,0 • Supporto di SMBIOS 2.7 • Regolazione multipla tensione CPU, GT_CPU, DRAM, VPPM, PCH 1,0V, VCCIO, VCCST, VCCSA, VCCPLL Hardware- • Rilevamento temperatura CPU / telaio / telaio optional / pompa...
  • Page 64 1.3 Impostazione jumper L'illustrazione mostra in che modo vengono impostati i jumper. Quando il cappuccio del jumper è posizionato sui pin, il jumper è "cortocircuitato". Se sui pin non è posizionato alcun cappuccio del jumper, il jumper è "aperto". L'illustrazione mostra un jumper a 3 pin i cui pin1 e pin2 sono "cortocircuitati"...
  • Page 65 Fatal1ty H270 Performance Series 2.6 Header e connettori sulla scheda Gli header e i connettori sulla scheda NON sono jumper. NON posizionare cappucci del jumper su questi header e connettori. Il posizionamento di cappucci del jumper su header e connettori provocherà...
  • Page 66 Connettore LED Collegare i LED alimen- SPEAKER DUMMY alimentazione e tazione e l’altoparlante a DUMMY altoparlante questo connettore. (SPK_PLED1 7 pin) (vedere pag. 1, n. 12) PLED+ PLED+ PLED- Connettori Serial ATA3 Questi sei connettori SATA3 (SATA_4_5: supportano cavi dati SATA vedere pag.
  • Page 67 Fatal1ty H270 Performance Series Header audio pannello Questo header serve a PRESENCE# MIC_RET anteriore collegare i dispositivi OUT_RET (AUDIO1_HD a 9 pin) audio al pannello audio (vedere pag. 1, n. 22) anteriore. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. L'audio ad alta definizione supporta le funzioni Jack sensing, ma il filo del pannello sullo chassis deve supportare HDA per funzionare correttamente.
  • Page 68 Connettori della ventola Questa scheda madre è dotata FAN_SPEED_CONTROL FAN_SPEED della CPU di un connettore per la ventola FAN_VOLTAGE (CPU_FAN1 a 4 pin) della CPU (Ventola silenziosa) (vedere pag. 1, n. 2) a 4 pin. Se si decide di collegare una ventola della CPU a 3 pin, collegarla al pin 1-3.
  • Page 69 Fatal1ty H270 Performance Series Header di intrusione nello Questa scheda madre supporta chassis la funzionalità di rilevamento (CI1 a 2 pin) CASE OPEN che rileva se Signal (vedere pag. 1, n. 21) il coperchio dello chassis è stato rimosso. Questa funzione...
  • Page 70: Contenido Del Paquete

    1 Introducción Gracias por comprar la placa base de la serie ASRock Fatal1ty H270 Performance, una placa base fiable fabricada según el rigurosísimo control de calidad de ASRock. Ofrece un rendimiento excelente con un diseño resistente de acuerdo con el compromiso de calidad y resistencia de ASRock.
  • Page 71 Fatal1ty H270 Performance Series 1.2 Especificaciones Plataforma • Factor de forma ATX • Admite la familia de procesadores Intel® Core i7/i5/i3/Pentium®/ ª ª Celeron® (zócalo 1151) de la 7 generación • Digi Power design • Diseño de 8 fases de alimentación • Admite la tecnología Intel®...
  • Page 72 • Gen9 LP, DX11.3, DX12 • Codificación y descodificación HWA: VP8, HEVC 8b, VP9, HEVC ª 10b (para CPU Intel® de la 7 generación) • Codificación y descodificación HWA: VP8, HEVC 8b; codificación y descodificación GPU/SW: VP9, HEVC 10b (para CPU Intel® de la 6ª...
  • Page 73 • 1 x Puerto USB 2.0 (compatible con protección contra electricidad estática (protección total contra picos ASRock)) • 1 puerto de ratón Fatal1ty (USB 2.0) (compatible con protección contra electricidad estática (protección ASRock Full Spike)) • 3 x puertos USB 3.0 de tipo A (compatible con protección contra electricidad estática (protección ASRock Full Spike))
  • Page 74 ** Compatible con la tecnología Optane de Intel® ** Admite unidad de estado sólido de NVMe como disco de arranque ** Admite el kit U.2 de ASRock Conector • 1 x Base de conexiones de puerto COM • 1 x Conector TPM • 1 x Base de conexiones para manipulación del chasis • 1 x LED de alimentación y base de conexiones para el altavoz • 1 x Conector para ventilador de la CPU (4 contactos)
  • Page 75 Fatal1ty H270 Performance Series Monitor • Detección de temperatura de la bomba de agua/Chasis/opcional delhardware del chasis de la CPU • Tacómetro del ventilador de la bomba de agua/Chasis/opcional del chasis/CPU • Ventilador silencioso de la bomba de agua/Chasis/opcional del chasis/CPU (ajuste automático de velocidad del ventilador del...
  • Page 76 1.3 Instalación de los puentes La instalación muestra cómo deben instalarse los puentes. Cuando la tapa de puente se coloca en los pines, el puente queda “Corto”. Si no coloca la tapa de puente en los pines, el puente queda “Abierto”. La ilustración muestra un puente de 3 pines cuyo pin 1 y pin 2 son “Cortos”...
  • Page 77 Fatal1ty H270 Performance Series 2.6 Conectores y cabezales incorporados Los cabezales y conectores incorporados NO son puentes. NO coloque tapas de puente sobre estos cabezales y conectores. Si coloca tapas de puente sobre los cabezales y conectores dañará de forma permanente la placa base.
  • Page 78 LED de alimentación y base Conecte el LED de aliment- SPEAKER DUMMY de conexiones para la altavoz ación del chasis y el altavoz DUMMY (SPK_PLED1 de 7 pines) del chasis a esta base de (consulte la pág.1, Nº 12) conexiones. PLED+ PLED+ PLED-...
  • Page 79 Fatal1ty H270 Performance Series Cabezal de audio del panel Este cabezal se PRESENCE# MIC_RET frontal utiliza para conectar OUT_RET (HD_AUDIO1 de 9 pines) dispositivos de audio al (consulte la pág.1, Nº 22) panel de audio frontal. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1.
  • Page 80 Conectores del ventilador de Esta placa base contiene un FAN_SPEED_CONTROL FAN_SPEED la CPU conector de ventilador (ven- FAN_VOLTAGE (CPU_FAN1 de 4 pines) tilador silencioso) de CPU (consulte la pág.1, N.º 2) de 4 pines. Si tiene pensando conectar un ventilador de CPU de 3 pines, conéctelo al Pin 1-3.
  • Page 81 Fatal1ty H270 Performance Series Cabezal de intrusión de Esta placa base es compatible chasis con la función de detección (CI1 de 2 pines) de CUBIERTA ABIERTA que Signal (consulte la pág.1, Nº 21) detecta si se ha retirado la cubi- erta del chasis.
  • Page 82 • Краткое руководство по установке системной платы ASRock серии Fatal1ty H270 Performance • Компакт-диск с ПО к системной плате ASRock серии Fatal1ty H270 Performance • 1 х экран панели с портами ввода-вывода • 2 х кабеля передачи данных Serial ATA (SATA) (приобретаются отдельно)
  • Page 83 Fatal1ty H270 Performance Series 1.2. Технические характеристики Платформа • Форм-фактор ATX ЦП • Поддерживаются процессоры Intel® Core 7/i5/i3/Pentium®/ Celeron® (разъем 1151) 7-го и 6-го поколений. • Digi Power design • Система питания 8 • Поддерживается технология Intel® Turbo Boost 2.0 • Поддержка...
  • Page 84 • Поддерживаемые встроенные технологии визуализации Intel® HD Graphics: Intel® Quick Sync Video с полностью аппаратным кодированием1 в форматах AVC, MVC (S3D) и MPEG-2, Intel® InTru 3D, технология Intel® Clear Video HD, Intel® Insider , Intel® HD Graphics • Gen9 LP, DX11.3, DX12 • Программно-аппаратное...
  • Page 85 • 1 x оптический выходной SPDIF • 1 порт USB 2.0 с защитой от электростатических разрядов (ASRock Full Spike Protection) • 1 x Порт для мыши Fatal1ty (USB 2.0) с защитой от электростатического напряжения (ASRock Full Spike Protection) • 3 x порты USB 3.0 тип А с защитой от электростатического...
  • Page 86 • 2 x слот Ultra M.2, поддерживает модуль M.2 SATA3 типа 2230/2242/2260/2280 с пропускной способностью 6,0 Гбит/с и модуль M.2 PCI Express до версии Gen3 x4 (32 Гбит/с)** ** Поддержка технологии Intel® Optane ** Поддерживаются в качестве загрузочных SSD-диски типа NVMe. ** Поддерживается комплект ASRock U.2. Разъемы...
  • Page 87 Fatal1ty H270 Performance Series Контроль • Датчик температуры на процессорном вентиляторе / Корпус/ дополнительном корпусном вентиляторе / оборудования водяной помпе • Тахометр процессорного вентилятора / Корпус/ дополнительного корпусного вентилятора / водяной помпы • Бесшумная работа процессорного вентилятора / Корпус/ дополнительного корпусного вентилятора / водяной...
  • Page 88 1.3 Установка перемычек Установка перемычек показана на рисунке. При установке колпачковой перемычки на контакты перемычка «замкнута». Если колпачковая перемычка на контакты не установлена, перемычка «разомкнута». На рисунке показана 3-контактная перемычка с замкнутыми контактами 1 и 2 при установке на них колпачковой перемычки. Перемычка...
  • Page 89 Fatal1ty H270 Performance Series 2.6 Колодки и разъемы, расположенные на материнской плате Расположенные на материнской плате колодки и разъемы перемычками НЕ являются. НЕ устанавливайте на эти колодки и разъемы колпачковые перемычки. Установка колпачковых перемычек на эти колодки и разъемы может вызвать неустранимое...
  • Page 90 Колодка светодиодного Предназначена SPEAKER индикатора питания и для подключения DUMMY DUMMY динамика корпуса светодиодного (7-контактная, SPK_ индикатора питания и PLED1) динамика корпуса. (см. стр. 1, № 12) PLED+ PLED+ PLED- Разъемы Serial ATA3 Эти шесть разъемов (SATA_4_5: SATA3 предназначены для см.
  • Page 91 Fatal1ty H270 Performance Series Аудиоколодка передней Эта колодка предназначена PRESENCE# MIC_RET панели для подключения OUT_RET (9-контактная, HD_ аудиоустройств к передней AUDIO1) аудиопанели. OUT2_L J_SENSE (см. стр. 1, № 22) OUT2_R MIC2_R MIC2_L 1. Аудиосистема высокого разрешения поддерживает функцию распознавания разъема, но...
  • Page 92 Разъемы вентиляторов Эта материнская плата FAN_SPEED_CONTROL снабжена 4-контактным ЦП FAN_SPEED FAN_VOLTAGE разъемом для малошумящего (4-контактный, CPU_ вентилятора ЦП. Если вы FAN1) собираетесь подключить (см. стр. 1, № 2) 3-контактный вентилятор охлаждения процессора, подключайте его к контактам 1-3. Разъем питания АТХ Эта...
  • Page 93 Fatal1ty H270 Performance Series Колодка для датчика Эта материнская плата вскрытия корпуса поддерживает технологию (2-контактная, CI1) определения вскрытия Signal (см. стр. 1, № 21) корпуса по снятию верхней части корпуса. Для этой технологии необходим корпус с функцией определения вскрытия. Колодка...
  • Page 94 1.1 Conteúdo da embalagem • Placa mãe ASRock Série Fatal1ty H270 Performance (ATX Form Factor) • Guia de Instalação Rápida da Placa-mãe Série Fatal1ty H270 Performance da ASRock • CD de Suporte da Placa-mãe Série Fatal1ty H270 Performance da ASRock • 1 x Painel de E/S...
  • Page 95 Fatal1ty H270 Performance Series 1.2 Especificações Plataforma • Formato ATX ª ª • Suporta Processadores 7 Geração Intel® Core i7/i5/i3/ Pentium®/Celeron® (Soquete 1151) • Digi Power design • Design com 8 fases de alimentação • Suporta a tecnologia Intel® Turbo Boost 2.0 • Suporta CPU desbloqueado da série K da Intel®...
  • Page 96 • Suporta gráficos incorporados Intel® HD: Intel® Quick Sync Video com AVC, MVC (S3D) e MPEG-2 Full HW Encode1, Intel® InTru 3D, Tecnologia Intel® Clear Video HD, Intel® Insider Gráficos Intel® HD • Gen9 LP, DX11.3, DX12 ª • HWAEncode/Decode: VP8, HEVC 8b, VP9, HEVC 10b (Para 7 Ger Intel®...
  • Page 97 • 1 x Porta USB 2.0 (Suporta Proteção ESD (Proteção Total Contra Picos ASRock)) • 1 x Porta de Mouse Fatal1ty (USB 2.0) (Suporta Proteção ESD (Proteção Total Contra Picos ASRock)) • 3 x Portas USB 3.0 Tipo A (Suporta Proteção ESD (Proteção Total Contra Picos ASRock)) • 1 x Porta USB 3.0 Tipo C (Suporta Proteção ESD (Proteção Total...
  • Page 98 * Se M2_2 estiver ocupado por um dispositivo tipo M.2 SATA, SATA_0 será desativado. • 2 x Soquete Ultra M.2, suporta módulo M.2 SATA3 6,0 Gb/s tipo 2230/2242/2260/2280 e módulo M.2 PCI Express até Gen3 x4 (32 Gb/s)** ** Suporta a tecnologia Intel® Optane ** Suporta NVMe SSD como discos de inicialização ** Suporta Kit ASRock U.2 Conector...
  • Page 99 Fatal1ty H270 Performance Series BIOSRecurso • AMI Legal UEFI BIOS com suporte multilingue GUI • ACPI 6,0 compatível com eventos de despertar • Suporte SMBIOS 2.7 • Multi ajuste de tensão de CPU, GT_CPU, DRAM, VPPM, PCH 1,0V, VCCIO, VCCST, VCCSA, VCCPLL Hardware- • Sensores de temperatura da CPU / Chassi / Chassi opcional/bom-...
  • Page 100 1.3 Configuração dos jumpers A imagem abaixo mostra como os jumpers são configurados. Quando a tampa do jumper é colocada nos pinos, o jumper é "Curto". Se não for colocada uma tampa de jumper nos pinos, o jumper é "Aberto". A imagem mostra um jumper de 3 pinos cujos pino1 e pino2 estão "Curtos"...
  • Page 101 Fatal1ty H270 Performance Series 2 . 6 Suportes e conectores onboard Os conectores e suportes onboard NÃO são jumpers. NÃO coloque tampas de jumpers sobre es- tes terminais e conectores Colocar tampas de jumpers sobre os terminais e conectores irá causar danos permanentes à...
  • Page 102 LED de alimentação e Conecte o LED de ali- SPEAKER Cabeçote de Autofalante mentação do chassi e o DUMMY DUMMY (SPK_PLED1 7 pinos) autofalante do chassi a este (ver p.1, N.º 12) cabeçote. PLED+ PLED+ PLED- Conectores série ATA3 Estes seis conectores (SATA_4_5: SATA3 suportam ver p.1, N.º...
  • Page 103 Fatal1ty H270 Performance Series Suporte de áudio do painel Este suporte destina-se à PRESENCE# MIC_RET frontal conexão dos dispositivos OUT_RET (HD_AUDIO1 de 9 pinos) de áudio no painel de (ver p.1, N.º 22) áudio frontal. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1.
  • Page 104 Conectores do ventilador Esta placa mãe inclui um FAN_SPEED_CONTROL da CPU FAN_SPEED conector de ventilador FAN_VOLTAGE (CPU_FAN1 de 4 pinos) da CPU (Ventilador (ver p.1, N.º 2) silencioso) de 4 pinos. Se você pretende conectar um ventilador da CPU de 3 pinos, por favor, conecte-o ao Pino 1-3.
  • Page 105 Fatal1ty H270 Performance Series Suporte de intrusão do Esta placa-mãe suporta chassi a função de detecção de (CI1 de 2 pinos) ABERTURA da CAIXA que Signal (ver p.1, N.º 21) detecta se a tampa do chassi foi removida. Esta função re- quer um chassi com design de detecção de intrusão.
  • Page 106 CPU destek listelerini de ASRock'ın web sitesinden bulabilirsiniz. ASRock web sitesi http://www.asrock.com. 1.1 Ambalaj İçeriği • ASRock Fatal1ty H270 Performance Series Ana Kart (ATX Form Faktörü) • ASRock Fatal1ty H270 Performance Series Hızlı Kurulum Kılavuzu • ASRock Fatal1ty H270 Performance Series Destek CD'si • 1 x I/O Panel Kalkanı...
  • Page 107 Fatal1ty H270 Performance Series 1.2 Özellikler Platform • ATX Form Faktörü • 7. ve 6. Nesil Intel® Core i7/i5/i3/Pentium®/Celeron® İşlemcileri destekler (Yuva 1151) • Digi Power design • 8 Güç Safhası tasarımı • Intel® Turbo Boost 2.0 Teknolojisini destekler • Intel® K-Serisi kilitsiz CPU özelliğini destekler • ASRock BCLK tam aralıklı...
  • Page 108 • Intel® HD Graphics Dahili Görsellerini destekler: AVC, MVC (S3D) ve MPEG-2 Full HW Encode1, Intel® InTru 3D, Intel® Net Video HD Teknolojisi, Intel® Insider , Intel® HD Graphics ile Intel® Quick Sync Video • Gen9 LP, DX11.3, DX12 • HWA Kodlama/Kod Çözme: VP8, HEVC 8b, VP9, HEVC 10b (7. Nesil Intel®...
  • Page 109 • 1 x USB 2.0 Bağlantı Noktası (ESD Koruması Destekler (ASRock Tam Ani Gerilim Koruması)) • 1 x Fatal1ty Fare Bağlantı Noktası (USB 2.0) (ESD Koruması Destekler (ASRock Tam Ani Gerilim Koruması)) • 3 x USB 3.0 Tip A Bağlantı Noktası (ESD Koruması Destekler (ASRock Tam Ani Gerilim Koruması))
  • Page 110 * M2_1 bir SATA tipi M.2 aygıtı tarafından kullanılıyorsa, SATA_5 devre dışı bırakılacaktır. * M2_2 bir SATA tipi M.2 aygıtı tarafından kullanılıyorsa, SATA_0 devre dışı bırakılacaktır. • 2 x Ultra M.2 Yuvası, 2230/2242/2260/2280 M.2 SATA3 6,0 Gb/sn. modülünü ve Gen3 x4 (32 Gb/sn.) değerine kadar M.2 PCI Express modülünü...
  • Page 111 Fatal1ty H270 Performance Series BIOS • Çok dilli GUI desteği ile AMI UEFI Legal BIOS • ACPI 6.0 Uyumlu uyandırma olayları Özelliği • SMBIOS 2.7 Desteği • CPU, GT_CPU, DRAM, VPPM, PCH 1,0V, VCCIO, VCCST, VCCSA, VCCPLL Çoklu Gerilim Ayarı...
  • Page 112 1.3 Bağlantı Teli Kurulumu Çizim, bağlantı tellerinin kurulumunu göstermektedir. Tel kapağı, pimlerin üzerine yerleştirildiğinde, tel "Kısa" olur. Pimlerin üzerinde tel kapağı bulunmadığında, tel "Açık" olur. Çizim, pin1 ve pin2 alanları "Kısa" olan ve bu iki pim üzerinde bir bağlantı teli kapağı bulunan 3-pin bağlantı telini göstermektedir. CMOS'u Temizle Bağlantı...
  • Page 113 Fatal1ty H270 Performance Series 2 . 6 Ekli Bağlantılar ve Bağlayıcılar Ekli bağlantılar ve bağlayıcılar bağlantı teli değildir. Bağlantı teli kapaklarını bu bağlantı ve bağlayıcılar üzerine yerleştirmeyin. Bağlantı teli kapaklarının bağlantılar ile bağlayıcılar üzerine yerleştirilmesi, anakarta kalıcı hasar verebilir. PLED+ PLED- Sistem Paneli Bağlantısı...
  • Page 114 Güç LED’i ve Hoparlör Lütfen kasa güç LED’ini SPEAKER DUMMY Bağlantısı ve kasa hoparlörünü bu DUMMY (7 pimli SPK_PLED1) bağlantıya takın. (bkz. s.1, No. 12) PLED+ PLED+ PLED- Seri ATA3 Bağlayıcıları Bu altı SATA3 bağlayıcısı, (SATA_4_5: veri aktarım hızı 6,0 Gb/ bkz.
  • Page 115 Fatal1ty H270 Performance Series Ön Panel Ses Bağlantısı Bu bağlantı, ses aygıtlarının PRESENCE# MIC_RET (9 pimli HD_AUDIO1) ön ses paneline bağlanması OUT_RET (bkz. s.1, No. 22) içindir. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. Yüksek Tanımlı Ses, Jak Algılama özelliğini destekler, ancak bu işlevin düzgün çalışabilmesi için kasa üzerindeki panel kablosunun HDA işlevini desteklemesi gerekmektedir.
  • Page 116 CPU Fan Bağlayıcıları Bu anakart, 4-Pin CPU FAN_SPEED_CONTROL FAN_SPEED (4 pimli CPU_FAN1) fan (Sessiz Fan) bağlayıcısı FAN_VOLTAGE (bkz. s.1, No. 2) sağlamaktadır. 3-Pin CPU fan bağlamak istiyorsanız, lütfen Pin 1-3'ü kullanın. ATX Güç Bağlayıcısı Bu anakart, 24-pin ATX (24 pimli ATXPWR1) güç...
  • Page 117 Fatal1ty H270 Performance Series Kasa Yetkisiz Erişim Bu anakartın kasa Bağlantısı kapağının açılıp açıl- (2 pimli CI1) madığını tespit eden bir Signal (bkz. s.1, No. 21) KASA AÇIK özelliği bu- lunmaktadır. Bu özelliğin kullanılabilmesi için kasa yetkisiz erişim tasarımına sahip bir kasa kullanıl- malıdır.
  • Page 118 십시오 . ASRock 의 웹사이트에서는 최신 VGA 카드와 CPU 지원 목록도 찾을 수 있습 니다 . ASRock 웹사이트 http://www.asrock.com. 1.1 포장 내용물 • ASRock Fatal1ty H270 Performance 시리즈 마더보드 (ATX 폼 팩터 ) • ASRock Fatal1ty H270 Performance 시리즈 간편 설치 안내서 • ASRock Fatal1ty H270 Performance 시리즈 지원 CD •...
  • Page 119 Fatal1ty H270 Performance Series 1.2 규격 • ATX 폼 팩터 플랫폼 • 7 세대 및 6 세대 Intel® Core i7/i5/i3/Pentium®/Celeron® 프 로세서 ( 소켓 1151) 지원 • Digi Power design • 8 개 전원 위상 구조 • Intel® Turbo Boost 2.0 기술 지원...
  • Page 120 • Intel® HD 그래픽스 빌트 - 인 비주얼 지원 : AVC, MVC (S3D) 및 MPEG-2 풀 HW Encode1 지원 Intel® Quick Sync Video, Intel® InTru 3D, Intel® 클리어 비디오 HD 기술 , Intel® Insider , Intel® HD 그래픽스 • Gen9 LP, DX11.3, DX12 •...
  • Page 121 • USB 2.0 포트 1 개 (ESD 보호 지원 (ASRock 풀 스파이크 보 호 )) • Fatal1ty 마우스 포트 1 개 (USB 2.0)(ESD 보호 지원 (ASRock 풀 스파이크 보호 )) • USB 3.0 타입 A 포트 3 개 (ESD 보호 지원 (ASRock 풀 스파...
  • Page 122 * SATA- 타입 M.2 장치에서 M2_2 을 사용 중이면 , SATA_0 이 비활성화됩니다 . • 울트라 M.2 소켓 2 개 , 타입 2230/2242/2260/2280 M.2 SATA3 6.0 Gb/s 모듈 및 Gen3 M.2 PCI Express 모듈을 4 개 (32 Gb/s) 까지 지원 ** ** Intel®...
  • Page 123 Fatal1ty H270 Performance Series • CPU/ 섀시 / 섀시 옵션 / 워터 펌프 온도 감지 하드웨어 • CPU/ 섀시 / 섀시 옵션 / 워터 펌프 팬 회전속도계 모니터 • CPU/ 섀시 / 섀시 옵션 / 워터 펌프 저소음 팬 (CPU 온도에...
  • Page 124 1.3 점퍼 설정 그림은 점퍼를 어떻게 설정하는지 보여줍니다 . 점퍼 캡을 핀에 씌우면 점퍼가 “단락” 됩니다 . 점퍼 캡을 핀에 씌우지 않으면 점퍼가 “단선”됩니다 . 그림은 3 핀 점퍼를 보여주며 핀 1 과 핀 2 는 점퍼 캡을 씌울 때 “단락”됩니다 . Clear CMOS 점퍼...
  • Page 125 Fatal1ty H270 Performance Series 2.6 온보드 헤더 및 커넥터 온보드 헤더와 커넥터는 점퍼가 아닙니다 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우지 마십시오 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우면 마더보드가 영구적으로 손상됩 니다 . PLED+ PLED- 섀시의 전원 스위치 , 리셋...
  • Page 126 전원 LED 및 스피커 헤더 섀시 전원 LED 와 섀시 스 SPEAKER DUMMY (7 핀 SPK_PLED1) 피커를 이 헤더에 연결하 DUMMY (1 페이지 , 12 번 항목 참조 ) 십시오 . PLED+ PLED+ PLED- 시리얼 ATA3 커넥터 이들 6 개의 SATA3 커넥터 (SATA_4_5: 는...
  • Page 127 Fatal1ty H270 Performance Series 전면 패널 오디오 헤더 이 헤더는 오디오 장치를 PRESENCE# MIC_RET (9 핀 HD_AUDIO1) 전면 오디오 패널에 연결 OUT_RET (1 페이지 , 22 번 항목 참조 ) 하는 데 사용됩니다 . OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. 고음질 오디오는 잭 감지를 지원하지만 올바르게 작동하려면 섀시의 패널 와이어가...
  • Page 128 FAN_SPEED_CONTROL CPU 팬 커넥터 이 마더보드에는 4 핀 FAN_SPEED FAN_VOLTAGE (4 핀 CPU_FAN1) CPU 팬 ( 저소음 팬 ) 커 (1 페이지 , 2 번 항목 참조 ) 넥터가 탑재되어 있습니 다 . 3 핀 CPU 팬을 연결 하려는 경우 핀 1-3 에 연 결하십시오...
  • Page 129 Fatal1ty H270 Performance Series 섀시 침입 헤더 이 마더보드는 섀시 커버 (2 핀 CI1) 가 제거될 경우 이를 감지 (1 페이지 , 21 번 항목 참조 ) Signal 하는 케이스 열림 감지 기 능을 지원합니다 . 이 기능 을 사용하려면 섀시 침입...
  • Page 130 トでは、 最新の VGA カードおよび CPU サポート一覧もご覧になれます。 ASRock ウェブ サイ ト http://www.asrock.com 1.1 パッケージの内容 • ASRock Fatal1ty H270 Performance Series マザーボード (ATX フォームファクタ) • ASRock Fatal1ty H270 Performance Series クイックインストールガイ ド • ASRock Fatal1ty H270 Performance Series サポート CD • 1 x I/O パネルシールド...
  • Page 131 Fatal1ty H270 Performance Series 1.2 仕様 プラット • ATX フォームファクター フォーム • 第 7 世代および第 6 世代 Intel® Core i7/i5/i3/Pentium®/ Celeron® プロセッサーに対応 (ソケッ ト 1151) • デジタル電源設計 • 8 電源フェーズ設計 • Intel® ターボブースト 2.0 テク ノロジーをサポート • Intel® K シリーズ アンロック CPU に対応...
  • Page 132 • Intel®HD グラフィ ックス内蔵ビジュアルおよび VGA 出力は、 グラフィックス GPU に統合されたプロセッサーのみでサポートされます。 • Intel®HD グラフィ ックス内蔵ビジュアルをサポート : AVC、 MVC (S3D) および MPEG-2 Full HW Encode1 が装備された Intel® クイック ・ シンク ・ ビデオ、 Intel® InTru 3D, Intel® ク リアー ・ ビデオ HD テク ノロジー、 Intel® Insider , Intel®...
  • Page 133 • 1 x 光 SPDIF 出力ポート • 1 x USB 2.0 ポート (静電気放電 (ESD) 保護に対応 (ASRock 完全スパイク保護) ) • 1 x Fatal1ty マウスポート (USB 2.0) ( 静電気放電 (ESD) 保護 に対応 (ASRock 完全スパイク保護) ) • 3 x USB 3.0 Type-A ポート (静電気放電 (ESD) 保護に対応...
  • Page 134 * SATA タイプ M.2 デバイスで M2_1 を使用している場合は、 SATA_5 は無効になります。 * SATA タイプ M.2 デバイスで M2_2 を使用している場合は、 SATA_0 は無効になります。 • 2 x ウルトラ M.2 ソケッ ト、 タイプ 2230/2242/2260/2280 M.2 SATA3 6.0 Gb/s モジュールと最大 Gen3 x4 (32 Gb/s) までの M.2 PCI Express モジュールに対応 * テク...
  • Page 135 Fatal1ty H270 Performance Series BIOS 機能 • AMI UEFI Legal BIOS、 多言語 GUI サポート付き • ACPI 6.0 準拠ウェイクアップイベント • SMBIOS 2.7 サポート • CPU、 GT_CPU、 DRAM、 VPPM、 PCH 1.0V、 VCCIO、 VCCST、 VCCSA、 VCCPLL 電圧マルチ調整 ハードウェ • CPU / シャーシ / シャーシ (オプション) / ウォーターポンプ温...
  • Page 136 1.3 ジャンパー設定 このイラストは、 ジャンパーの設定方法を示しています。 ジャンパーキャップがピ ンに被さっていると、 ジャンパーは 「ショート」 です。 ジャンパーキャップがピンに被 さっていない場合には、 ジャンパーは 「オープン」 です。 この図は 3ピンのジャンパー を表し、 ジャンパーキャップがピン 1 とピン 2 に被さっているとき、 これらのピンは 「ショート」 です。 CMOS クリアジャンパー (CLRMOS1) デフォルト CMOS のク リア (p.1、 No. 25 参照) CLRMOS1 を使って CMOS 内のデータをク リアできます。 クリアして、 デフォルト 設定にシステムパラメーターをリセッ...
  • Page 137 Fatal1ty H270 Performance Series 2.6 オンボードのヘッダーとコネクター オンボードヘッダーとコネクターはジャンパーではありません。 これらヘッダーとコネク ターにはジャンパーキャップを被せないでく ださい。 ヘッダーおよびコネクターにジャン パーキャップを被せると、 マザーボードに永久損傷が起こるこ とがあります。 システムパネルヘッダー 電源スイッチを接続し、 ス PLED+ (9 ピンパネル 1) イッチをリセッ トし、 下記 PLED- PWRBTN# (p.1、 No. 11 参照) のピン割り当てに従って、 シャーシのシステムステー タス表示ランプをこのヘッ RESET# ダーにセッ トします。 ケー HDLED- HDLED+ ブルを接続するときには、...
  • Page 138 電源 LED とスピーカーヘッ シャーシ電源 LED とシャー SPEAKER DUMMY ダー シスピーカーをこのヘッ DUMMY (7 ピン SPK_PLED1) ダーに接続してく ださい。 (p.1、 No. 12 参照) PLED+ PLED+ PLED- シリアル ATA3 コネクター これら 6 つの SATA3 コネ クターは、 最高 6.0 Gb/ 秒 (SATA_4_5: p.1、 No. 8 参照) のデータ転送速度で内部...
  • Page 139 Fatal1ty H270 Performance Series フロントパネルオーディオ このヘッダーは、 フロント PRESENCE# ヘッダー オーディオパネルにオーディ MIC_RET OUT_RET (9 ピン HD_AUDIO1) オデバイスを接続するため (p.1、 No. 22 参照) のものです。 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. ハイディフィニションオーディオはジャックセンシングをサポートしていますが、 正しく 機能するためには、 シャーシのパネルワイヤーが HDA をサポートしているこ とが必要 です。 お使いのシステムを取り付けるには、 当社のマニュアルおよびシャーシのマニュ アルの指示に従ってく ださい。 2. AC 97 オーディオパネルを使用する場合には、 次のステップで、 前面パネルオーディオ...
  • Page 140 CPU ファンコネクター このマザーボードは 4 ピン FAN_SPEED_CONTROL (4 ピン CPU_FAN1) CPU ファン (静音ファン) コネ FAN_SPEED FAN_VOLTAGE (p.1、 No. 2 参照) クターを提供します。 3 ピン の CPU ファンを接続する場 合には、 ピン 1-3 に接続して く ださい。 ATX 電源コネクタ このマザーボードは 24 ピン (24 ピン ATXPWR1) ATX 電源コネクタを提供し (p.1、...
  • Page 141 Fatal1ty H270 Performance Series ケースイントリ ュージョン このマザーボードはシャーシ ヘッダー カバーが開けられたこ とを (2 ピン CI1) 検知する、 ケース開閉検知機 Signal (p.1、 No. 21 参照) 能をサポートします。 この機 能には、 シャーシイントルー ジョン検知設計されたシャー シが必要です。 シリアルポートヘッダー この COM1 ヘッダーはシリ RRXD1 DDTR#1 (9 ピン COM1) アルポートモジュールをサ DDSR#1 CCTS#1 (p.1、 No. 19 参照)...
  • Page 142 1 简介 感谢您购买 ASRock Fatal1ty H270 Performance 系列主板,这是按照 ASRock 华 擎一贯严格质量控制标准生产的性能可靠的主板。 它提供符合华擎质量和耐久 性承诺的精良设计和卓越性能。 由于主板规格和 BIOS 软件可能已更新,因此,本文档的内容可能会随时更改,恕不 另行通知。 如果本文档有任何修改,则更新的版本将发布在华擎网站上,我们不会 另外进行通知。 如果您需要与此主板相关的技术支持,请访问我们的网站以具体了 解所用型号的信息。 您也可以在华擎网站上找到最新 VGA 卡和 CPU 支持列表。 华 擎网站 http://www.asrock.com。 1.1 包装清单 • 华擎 Fatal1ty H270 Performance 系列主板(ATX 规格尺寸) • 华擎 Fatal1ty H270 Performance 系列快速安装指南...
  • Page 143 Fatal1ty H270 Performance Series 1.2 规格 • ATX 规格尺寸 平台 • 支持第 7 代和第 6 代 Intel® Core i7/i5/i3/Pentium®/Celeron® 处理器 (Socket 1151) • Digi Power design • 8 电源相设计 • 支持 Intel® Turbo Boost 2.0 技术 • 支持 Intel® K 系列不锁频 CPU •...
  • Page 144 • 支持 Intel® HD Graphics 内置视效 : Intel® 快速同步视频,采 用 AVC、MVC (S3D) 和 MPEG-2 Full HW Encode1、Intel® InTru 3D、Intel® Clear Video HD 技术、Intel® Insider 、 Intel® HD Graphics • Gen9 LP, DX11.3, DX12 • HWA 编码 / 解码 : VP8, HEVC 8b, VP9, HEVC 10b ( 适用于 第...
  • Page 145 • 1 x HDMI 端口 • 1 x 光学 SPDIF 输出端口 • 1 x USB 2.0 端口(支持 ESD 保护,即华擎全防护) • 1 x Fatal1ty 鼠标端口(USB 2.0,支持 ESD 保护,即华擎全 防护) • 3 x USB 3.0 类型 A 端口(支持 ESD 保护,即华擎全防护) • 1 x USB 3.0 类型 C 端口(支持 ESD 保护,即华擎全防护)...
  • Page 146 • 1 x COM 端口接头 接口 • 1 x TPM 接脚 • 1 x 机箱侵入接脚 • 1 x 电源 LED 和扬声器接脚 • 1 x CPU 风扇接口 (4 针 ) * CPU 风扇接口支持最高 1A (12W) 功率的 CPU 风扇。 • 2 x 机箱风扇接口(4 针)(智能风扇速度控制) •...
  • Page 147 Fatal1ty H270 Performance Series * 要安装 Windows® 7 OS,需要 xHCI 驱动程序已封装到 ISO 文件的经修改的安装盘。 请参考第 168 页了解详情。 * 有关已更新的 Windows® 10 驱动程序,请访问华擎网站了解 详情 :http://www.asrock.com • FCC, CE, WHQL 认证 • ErP/EuP 支持(需要支持 ErP/EuP 的电源) * 有关详细产品信息,请访问我们的网站: http://www.asrock.com 须认识到超频会有一定风险,包括调整 BIOS 设置,应用“自由超频技术”,或使用 第三方超频工具。 超频可能会影响到系统的稳定性,甚至对系统的组件和设备造成...
  • Page 148 1.3 跳线设置 此图显示如何设置跳线。 将跳线帽装到这些针脚上时,跳线 “短接”。 如果 这些针脚上没有装跳线帽,跳线 “开路”。 此图显示 3 针跳线,当跳线帽装在 针脚 1 和针脚 2 上,它们“短接”。 清除 CMOS 跳线 (CLRMOS1) 清除 CMOS 默认 (见第 1 页,第 25 个) CLRMOS1 允许您清除 CMOS 中的数据。 要清除和重置系统参数到默认设 置,请关闭计算机,从电源上拔下电源线插头。 等候 15 秒后,使用跳线帽将 CLRMOS1 上的针脚 2 和针脚 3 短接 5 秒。 但是,请勿在更新 BIOS 后立即清 除...
  • Page 149 Fatal1ty H270 Performance Series 2.6 板载接脚和接口 板载接脚和接口不是跳线。 不要将跳线帽装到这些接脚和接口上。 将跳线帽装到这 些接脚和接口上将会对主板造成永久性损坏。 PLED+ PLED- 系统面板接脚 按照下面的针脚分配, PWRBTN# (9 针 PANEL1) 将机箱上的电源开关、 (见第 1 页, 第 11 个) 重置开关和系统状态指 示灯连接到此接脚。 在 RESET# HDLED- 连接线缆前请记下正负 HDLED+ 针脚。 PWRBTN(电源开关): 连接到机箱前面板上的电源开关。 您可以配置使用电源开关关闭系统的方式。 RESET(重置开关): 连接到机箱前面板上的重置开关。 如果计算机死机,无法执行正常重新启动,按重 置开关重新启动计算机。...
  • Page 150 电源 LED 和扬声器接脚 请将机箱电源 LED 和机 SPEAKER DUMMY (7 针 SPK_PLED1) 箱扬声器连接到此接脚。 DUMMY (见第 1 页,第 12 个) PLED+ PLED+ PLED- 串行 ATA3 接口 这六个 SATA3 接口支持 (SATA_4_5: 最高 6.0 Gb/s 数据传输 见第 1 页, 第 8 个) 速率的内部存储设备的 (SATA_2_3: SATA 数据线。...
  • Page 151 Fatal1ty H270 Performance Series 此接脚用于将音频设备 前面板音频接脚 PRESENCE# MIC_RET 连接到前音频面板。 (9 针 HD_AUDIO1) OUT_RET (见第 1 页,第 22 个) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. 高清音频支持插孔感测,但机箱上的面板连线必须支持 HDA 才能正常工作。 请按 照我们的手册和机箱手册的说明安装系统。 2. 如果您使用 AC’97 音频面板,请按照以下步骤将它安装到前面板音频接脚: A. 将 Mic_IN (MIC) 连接到 MIC2_L。 B. 将 Audio_R (RIN) 连接到 OUT2_R,将 Audio_L (LIN) 连接到 OUT2_L。...
  • Page 152 CPU 风扇接口 此主板提供 4 针 CPU 风 FAN_SPEED_CONTROL (4 针 CPU_FAN1) FAN_SPEED 扇(静音风扇)接口。 FAN_VOLTAGE (见第 1 页, 第 2 个) 如果您打算连接 3 针 CPU 风扇,请将它连接 到针脚 1-3。 ATX 电源接口 此主板提供 24 针 ATX (24 针 ATXPWR1) 电源接口。 要使用 20 (见第 1 页,第 5 个) 针...
  • Page 153 Fatal1ty H270 Performance Series 此主板支持 CASE OPEN 机箱侵入接脚 (2 针 CI1) (机箱打开)检测功能 - 检 (见第 1 页,第 21 个) Signal 测机箱盖是否拆下。 此功 能需要采用侵入检测设计 的机箱。 此 COM1 接脚支持串行端 串行端口接脚 RRXD1 DDTR#1 DDSR#1 (9 针 COM1) 口模块。 CCTS#1 (见第 1 页,第 19 个)...
  • Page 154 电子信息产品污染控制标示 依据中国发布的「电子信息产品污染控制管理办法」及 SJ/T 11364-2006「电子 信息产品污染控制标示要求」,电子信息产品应进行标示,藉以向消费者揭露 产品中含有的有毒有害物质或元素不致发生外泄或突变从而对环境造成污染或 对人身、财产造成严重损害的期限。依上述规定,您可于本产品之印刷电路板 上看见图一之标示。图一中之数字为产品之环保使用期限。由此可知此主板之 环保使用期限为 10 年。 图一 有毒有害物质或元素的名称及含量说明 若您欲了解此产品的有毒有害物质或元素的名称及含量说明,请参照以下表格 及说明。 有害物质或元素 部件名称 铅 (Pb) 镉 (Cd) 汞 (Hg) 六价铬 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 印刷电路板 及电子组件 外部信号连 接头及线材 O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定 的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准 规定的限量要求,然该部件仍符合欧盟指令...
  • Page 155 如本文件有任何修改,可至華擎網站逕行取得更新版本,不另外通知。 若您需要與本 主機板相關的技術支援,請上我們的網站瞭解有關您使用機型的特定資訊。 您也可以 在華擎網站找到最新的 VGA 卡及 CPU 支援清單。 華擎網站 http://www.asrock.com。 1.1 包裝內容 • 華擎 Fatal1ty H270 Performance 系列主機板(ATX 尺寸) • 華擎 Fatal1ty H270 Performance 系列快速安裝指南 • 華擎 Fatal1ty H270 Performance 系列支援光碟 • 1 x I/O 面板外罩 • 2 x Serial ATA (SATA) 資料纜線(選用)...
  • Page 156 • Digi Power design • 8 電源相位設計 • 支援 Intel® Turbo Boost 2.0 技術 • 支援 Intel® K 系列未鎖頻 CPU • 支援華擎 BCLK 全域電壓超頻 • Intel® H270 晶片組 • 雙通道 DDR4 記憶體技術 記憶體 • 4 x DDR4 DIMM 插槽 • 支援 DDR4 2400/2133 非 ECC 、無緩衝記憶體 * * 第...
  • Page 157 Fatal1ty H270 Performance Series • Gen9 LP、DX11.3、DX12 • HWA 編碼 / 解碼: VP8、HEVC 8b、VP9、HEVC 10b ( 適 用於第 7 代 Intel® CPU) • HWA 編碼 / 解碼: VP8、HEVC 8b;GPU/SW 編碼 / 解碼: VP9、HEVC 10b ( 適用於第 6 代 Intel® CPU) •...
  • Page 158 • 1 x DVI-D 連接埠 • 1 x HDMI 連接埠 • 1 x 光纖 SPDIF 輸出連接埠 • 1 x USB 2.0 連接埠(支援靜電保護(華擎全防護)) • 1 x Fatal1ty 滑鼠連接埠 (USB 2.0)(支援靜電保護(華擎全 防護)) • 3 x USB 3.0 Type-A 連接埠(支援靜電保護(華擎全防護)) • 1 x USB 3.0 Type-C 連接埠(支援靜電保護(華擎全防護))...
  • Page 159 Fatal1ty H270 Performance Series • 1 x COM 連接埠排針 接頭 • 1 x TPM 排針 • 1 x 機殼防護排針 • 1 x 電源 LED 及喇叭排針 • 1 x CPU 風扇接頭 (4-pin) * CPU 風扇接頭支援最高 1A (12W) 風扇功率的 CPU 風扇。 • 2 x 機殼風扇接頭 (4-pin)(智慧型風扇速度控制)...
  • Page 160 • Microsoft® Windows® 10 64 位元 ( 適用於第 7 代 Intel® CPU) 作業系統 • Microsoft® Windows® 10 64 位元/ 8.1 64 位元/ 7 32 位元/ 7 64 位元 ( 適用於第 6 代 Intel® CPU) * 若要安裝 Windows® 7 作業系統,需要使用修改過的安裝光 碟(已將 xHCI 驅動程式封裝至 ISO 檔案)。 如需詳細說明, 請查看第...
  • Page 161 Fatal1ty H270 Performance Series 1.3 跳線設定 圖例顯示設定跳線的方式。 當跳線帽套在針腳上時,該跳線為「短路」。 若 沒有跳線帽套在針腳上,該跳線為「開啟」。 圖例顯示當 3-pin 跳線的跳線蓋 套在 pin1 及 pin2 時,這兩個針腳皆為「短路」。 清除 CMOS 跳線 (CLRMOS1) 清除 CMOS 預設 (請參閱第 1 頁,編號 25) 您可利用 CLRMOS1 清除 CMOS 中的資料。 若要清除及重設系統參數為預設 設定,請先關閉電腦電源,再拔下電源供應器的電源線。 在等待 15 秒後, 請使用跳線帽讓 CLRMOS1 上的 pin2 及 pin3 短路約 5 秒。 不過,請不要在更...
  • Page 162 2.6 板載排針及接頭 板載排針及接頭都不是跳線。 請勿將跳線帽套在這些排針及接頭上。 將跳線帽套在 排針及接頭上,將造成主機板永久性的受損。 PLED+ PLED- 系統面板排針 請依照以下的針腳排 PWRBTN# (9-pin PANEL1) 列將機殼上的電源開 (請參閱第 1 頁, 編號 11) 關、重設開關及系統 狀態指示燈連接至此 RESET# HDLED- 排針。 在連接纜線 HDLED+ 之前請注意正負針 腳。 PWRBTN ( 電源開關 ): 連接至機殼前面板上的電源開關。 您可設定使用電源開關關閉系統電源的方式。 RESET ( 重設開關 ): 連接至機殼前面板上的重設開關。 若電腦凍結且無法執行正常重新啟動,按下重設 開關即可重新啟動電腦。...
  • Page 163 Fatal1ty H270 Performance Series 電源 LED 及喇叭排針 請將機殼電源 LED SPEAKER DUMMY (7-pin SPK_PLED1) 及機殼喇叭連接至此 DUMMY (請參閱第 1 頁,編號 12) 排針。 PLED+ PLED+ PLED- Serial ATA3 接頭 這六組 SATA3 接頭 (SATA_4_5: 皆支援內部儲存裝置 請參閱第 1 頁,編號 8) 的 SATA 資料纜線, (SATA_2_3: 最高可達 6.0 Gb/s 資...
  • Page 164 前面板音訊排針 本排針適用於連接音訊 PRESENCE# MIC_RET (9-pin HD_AUDIO1) 裝置至前面板音訊。 OUT_RET (請參閱第 1 頁,編號 22) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. 高解析度音訊支援智慧型音效介面偵測 (Jack Sensing),但機殼上的面板線必須支援 HDA 才能正確運作。 請依本手冊及機殼手冊說明安裝系統。 2. 若您使用 AC’97 音訊面板,請按照以下步驟安裝至前面板音訊排針: A. 將 Mic_IN (MIC) 連接至 MIC2_L。 B. 將 Audio_R (RIN) 連接至 OUT2_R 且將 Audio_L (LIN) 連接至 OUT2_L。 C.
  • Page 165 Fatal1ty H270 Performance Series CPU 風扇接頭 本主機板配備 4-Pin FAN_SPEED_CONTROL (4-pin CPU_FAN1) CPU 風扇 ( 靜音風扇 ) FAN_SPEED FAN_VOLTAGE (請參閱第 1 頁, 編號 2) 接頭。 若您計畫連接 3-Pin CPU 風扇,請接 至 Pin 1-3。 ATX 電源接頭 本主機板配備一組 24- (24-pin ATXPWR1) pin ATX 電源接頭。 若...
  • Page 166 機殼防護排針 本主機板支援「機殼 (2-pin CI1) 開啟」偵測功能,可 (請參閱第 1 頁,編號 21) Signal 偵測機殼外蓋是否遭 移除。 若要使用本功 能,機殼必須採用機 殼防護偵測設計。 此 COM1 排針支援序 序列連接埠排針 RRXD1 DDTR#1 DDSR#1 (9-pin COM1) 列連接埠模組。 CCTS#1 (請參閱第 1 頁,編號 19) RRI#1 RRTS#1 TTXD1 DDCD#1 TPM 排針 此接頭支援信賴平台 (17-pin TPMS1) 模組 (TPM) 系統,可 (請參閱第...
  • Page 167 Fatal1ty H270 Performance Series Spesifikasi Platform • Bentuk dan Ukuran ATX • Mendukung Prosesor Intel® Core i7/i5/i3/Pentium®/Celeron® (Soket 1151) Generasi ke-7 dan ke-6 • Digi Power design • Desain 8 Fase Daya • Mendukung Teknologi Intel® Turbo Boost 2.0 • Mendukung CPU Intel® K-Series tidak terkunci • Mendukung Overclock Jarak penuh ASRock BCLK...
  • Page 168 • Mendukung Intel® HD Graphics Built-in Visuals: Intel® Quick Sync Video dengan AVC, MVC (S3D) dan MPEG-2 Full HW Encode1, Intel® InTru 3D, Intel® Clear Video HD Technology, Intel® Insider , Intel® HD Graphics • LP Generasi ke-9, DX11.3, DX12 • Encode/Decode HWA: VP8, HEVC 8b, VP9, HEVC 10b (untuk CPU Intel®...
  • Page 169 • 1 x Port SPDIF Out Optik • 1 x Port USB 2.0 (Mendukung Perlindungan ESD (ASRock Full Spike Protection)) • 1 x Port Mouse Fatal1ty (USB 2.0) (Mendukung Perlindungan ESD (ASRock Full Spike Protection)) • 3 x Port USB 3.0 Tipe A (Mendukung Perlindungan ESD (Perlindungan ASRock Full Spike)) • 1 x Port USB 3.0 Tipe C (Mendukung Perlindungan ESD...
  • Page 170 * Jika M2_1 digunakan oleh perangkat SATA tipe M.2, maka SATA_5 akan dinonaktifkan. * Jika M2_2 digunakan oleh perangkat SATA tipe M.2, maka SATA_0 akan dinonaktifkan. • 2 Soket Ultra M.2, mendukung jenis modul 2230/2242/2260/2280 M.2 SATA3 6.0 Gb/s dan modul M.2 PCI Express hingga Gen3 x4 (32 Gb/s)** ** Mendukung Intel®...
  • Page 171 Fatal1ty H270 Performance Series FiturBIOS • AMI UEFI Legal BIOS dengan dukungan GUI multibahasa • ACPI 6,0 Kompatibel dengan aktivitas pengaktifan • Dukungan SMBIOS 2.7 • Multipengatur Tegangan CPU, GT_CPU, DRAM, VPPM, PCH 1.0V, VCCIO, VCCST, VCCSA, VCCPLL Perangkat • Deteksi suhu CPU/Sasis/Sasis Opsional/Pompa Air KerasMonitor • Takometer Kipas CPU/Sasis/Sasis Opsional/Pompa Air...
  • Page 172 Enabling USB Ports for Windows® 7 Installation Intel® Braswell and Skylake has removed their support for the Enhanced Host Controller Interface (EHCI – USB2.0) and only kept the eXtensible Host Controller Interface (XHCI – USB3.0). Due to that fact that XHCI is not included in the Windows 7 inbox drivers, users may find it difficult to install Windows 7 operating system because the USB ports on their motherboard won’t work.
  • Page 173 Fatal1ty H270 Performance Series Instructions Step 1 Insert the Windows® 7 installation disk or USB drive to your system. Step 2 Extract the tool (Win7 USB Patcher) and launch it. Step 3 Select how you want to install Windows 7 later.
  • Page 174 Step 5 Select the USB storage, compact disk or destination folder for the new Windows 7 installation file. Step 6 Click “Start” to begin. Step 7 Now you are able to install Windows® 7 on Braswell or Skylake with the new burned CD. Or please use the patched ISO image to make an OS USB drive to install the OS.
  • Page 175: Contact Information

    Contact Information If you need to contact ASRock or want to know more about ASRock, you’re welcome to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer for further information. For technical questions, please submit a support request form at http://www.asrock.com/support/tsd.asp ASRock Incorporation 2F., No.37, Sec.
  • Page 176 EC-Declaration of Conformity For the following equipment: Motherboard (Product Name) Fatal1ty H270 Performance Series / ASRock (Model Designation / Trade Name) ASRock Incorporation (Manufacturer Name) 2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District, Taipei City 112, Taiwan (R.O.C.) (Manufacturer Address)

Table of Contents