Philips HTR5204 Quick Start Manual

1 Connect
A Connecting Recorder and TV B Connecting Speakers and radio
antennas to AV Receiver
FRONT CENTRE
Television ( rear)
FRONT FRONT
RIGHT
LEFT
Philips Recorder (rear)
CVBS OUT
Y P B
EXT 1 TO TV EXT 2 TO VCR/SAT L
TV-OUT ANTENNA-IN
P R
R
S-VIDEO OUT AUDIO COAXIAL
VIDEO OUT AUDIO OUT DIGITAL OUT
A
Antenna
Cable TV/
Satellite Receiver
Philips AV
TO VCR Receiver (rear)
TO TV
A Unplug the existing antenna cable from your TV and A
Connect the various coloured plugs from the
connect it to the ANTENNA IN socket on the speakers and subwoofer to the same coloured
recorder. sockets on the AV Receiver.
B
If you have a Cable Box or Satellite Receiver, Connect the FM antenna to the inner pin of the
FM 75 socket. Extend the antenna for optimum
connect a scart cable from the EXT2-TO VCR/
reception.
SAT scart socket on the recorder to the SCART
(TO VCR) socket on the Cable Box/Satellite
C
Unfold the AM/MW loop antenna and fix the claw
Receiver.
into the slot. Push the tabs and insert the wires into
the AM/MW sockets.
Note The antenna connection may not be required,
depending on the capabilities of your Cable Box /
Note Keep the antennas away from the electronic
Satellite Receiver. Refer to its user manual for more
devices to prevent unwanted interference.
information.
D
Plug in the power cable from the AV Receiver to an
B
Connect an RF antenna cable (supplied) from the
AC power outlet.
TV-OUT socket on the recorder to the
Antenna In socket on the TV.
C
Connect a scart cable (supplied) from the
EXT1-TO TV scart socket on the recorder to the
SCART socket on your TV.
D Plug in the power cable from the recorder to an AC
power outlet.
Note Refer to the accompanying User Manual for
other possible connections.
C Connecting Recorder and AV
Receiver
SUBWOOFER
Y
L
REAR REAR
RIGHT LEFT
R
COAXIAL
AUDIO
AUDIO OUT DIGITAL OUT
Philips Recorder (rear)
CVBS OUT Y
EXT 1 TO TV EXT 2 TO VCR/SAT L
TV-OUT ANTENNA-IN
R
S-VIDEO OUT AUDIO COAXIAL
VIDEO OUT AUDIO OUT DIGITAL OUT
AM/MW loop
antenna
12 mm
C
Philips AV
Receiver (rear)
AM/
FM antenna
B
This connection enables you to hear the recorder
playback from the AV Receiver. It supports multi-
channel surround sound output.
Connect the coaxial cable (supplied) between the
socket on the recorder and
COAXIAL OUT
COAXIAL IN socket on the AV Receiver.
2 Set up
A Finding the viewing channel
Press 2 STANDBY-ON on the recorder.
A
B
Turn on the TV.
You should see the installation menu.
Menu Language
P B
English
Please select your language.
Defines the languages of all Dansk
on-screen menu displays.
Deutsch
P
R Español
Français
Italiano
Nederlands
Norsk
C
In case you don't see the recorder's setting menu,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT, ° button) until
P B
P R you see the menu. This is the correct viewing
MAINS
channel for the recorder.
B Start initial installation
AM/
Use the recorder's remote control and follow the on-
screen instructions to complete the installation.
A
Select the desired menu language, your country and
A
the TV shape.
Note Press OK or the Green button on the
remote control to go to the next screen.
B
Press OK to start automatic analogue channel
search.
Channel search
Start Auto search
Previous Skip
C
Once complete, press the Green button to
LIVE TV continue.
D
Enter the correct time in the entry field, press OK
followed by the Green button to continue.
Proceed the same for date entry.
E
To continue with the GUIDE Plus+ installation,
PAUSE LIVE TV
press the Green button.
Otherwise, press the Red button to skip.
HOME
SOURCE
TIMER
GUIDE Plus+
3 Enjoy
About the Time Shift Buffer
C Install the GUIDE Plus+ system
(TSB)
Once you turn on the recorder, the selected TV
programme will be stored in a temporary hard disk
storage called Time Shift Buffer 'TSB'. The 'TSB' can
store up to 6 hours of programmes temporarily.
Press INFO to display the Time Shift video bar.
Follow the on-screen instructions to select your
language, country and enter the postal code of your
Start time of the
area.
programme
Note If no or wrong postal code is entered, it will
cause no GUIDE Plus+ (EPG) service information.
Selected clips for
D Load the TV listing data recording
A
Press TIMER (GUIDE Plus+) to exit GUIDE Plus+
system.
Notes:
Leave the recorder in 'standby' mode and turn 'on'
- The contents in the time shift video bar will be
the set-top box overnight to collect the TV listing cleared when you press STANDBY ON (2).
data, this may take up to 24 hours. - The blue LED on the recorder will be lit up when the
Time Shift Buffer is active or when you playback a
Note If you tune to your Host Channel before going
recording from the hard disk drive.
to 'standby' mode, this recorder will start downloading
the TV listings data immediately.
B
Check the { Editor } screen the next day to ensure
Watch TV – Pause live TV
the source and programme numbers are matching for
all channels.
Your Philips Recorder allows you to control the TV
programme. You can PAUSE it as if you were in control
of the live broadcast.
F Turn on the AV Receiver and fi ne-
tune the speakers A
Turn on your recorder to the live TV mode and
press P +/- to select a TV programme.
Press 2 STANDBY-ON on the AV Receiver.
A
To hear recorder playback from the AV Receiver,
If you cannot hear the playback from the recorder, turn on the AV Receiver. If no sound, press
press SOURCE on the AV Receiver repeatedly until SOURCE repeatedly to change the input source
'COAX IN' appears on the display panel. mode for the AV Receiver to 'COAX IN'.
B Press PAUSE LIVE TV to suspend it.
To adjust or fi ne-tune the speaker settings
B C
Press and hold PROGRAM on the AV Receiver for Press PAUSE LIVE TV again to continue.
more than five seconds.
D
To return to live broadcast, press LIVE TV.
C Press .or > to toggle between 'CENTER
DELAY', 'REAR DELAY', 'TEST TONE' and 'EXIT'
setting options.
About the internal hard disk
D
Press PROGRAM to select an option.
drive
E
Rotate the VOL control to scroll through the
various delay time options, then press PROGRAM
This recorder's hard disk drive can be used as a Media
to confirm your setting.
Jukebox, allowing you to store and playback your TV
Repeat steps 3~5 for other settings options. programmes, videos, music and photos fi les.
F To exit the speaker setting mode, press .or >
Press HOME on the remote control to access your
until 'EXIT' appears.
contents stored in the { Hard Disk }.
Programmes
stored in the 'TSB'
Now
22:04:30
Present time
Current time
of playback