Pioneer BDP-LX54 Service Manual page 31

5
QQ
3 7 63 1515 0
6 The error rates will be displayed on the screen. (The judging criteria are described in the next item.)
Nearly simultaneously, the results of error rate measurement will be written in the USB memory device as a text file.
(Example of the name of a text file when measuring error rates for the outer track: [result_od_00e036d61ffa.txt])
TE
L 13942296513
7 After confirming that writing to the USB memory device has been completed with its access lamp, turn the unit off then
unplug the USB memory device. (If a USB memory device not having an access lamp is used, turn the unit off about
5 seconds after the results of measurement are displayed.)
To perform error rate measurement again, repeat the steps from 1.
In such a case, the results of a later measurement will be written over the existing data in the USB memory device.
Descriptions of Results
Max Uncorrectable Allowed:
→ Average correctable error counts (reference value)
(The indication on the screen is wrong.)
Max Correctable Allowed:
→ Maximum correctable error counts (reference value)
Maximum Uncorrectable:
→ Not in use
Maximum Correctable:
→ Maximum correctable error counts (measured value)
Average Uncorrectable:
www
→ Not in use
Average Correctable:
→ Average correctable error counts (measured value)
.
Test Status: If the measured average/maximum correctable error counts are less than or equal to the
reference values, "Pass" will be indicated.
If any measured value exceeds the above-mentioned reference value, "Fail" will be indicated.
5
http://www.xiaoyu163.com
6
x ao u163
y
i
6
http://www.xiaoyu163.com
7
2 9
8
Q Q
3 6 7 1 3 1 5
DVD
38
(reference value)
200
(reference value) (reference value)
0
(Not in use)
Indication of
measured value
0
(Not in use)
co
Indication of
measured value
.
BDP-LX54
7
8
9 4 2 8
0 5 8 2 9 9 4 2 8
BD
220
(reference value)
1000
0
(Not in use)
Indication of
measured value
m
0
(Not in use)
Indication of
measured value
8
9 9
A
B
C
9 9
D
E
F
31