Connection To A Cable / Satellite Box - Philips DVDR3545V User Manual

CONNECTION TO A CABLE / SATELLITE BOX

1) Disconnect the power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
3) Plug in the power cords of the devices to the AC outlet.
e.g.)
HDM OUT
DVD/VCR
S-VIDEO IN --- AUDIO --- OUT
L
R
IN
IN --- VIDEO --- OUT
RCA video
cable
VIDEO IN
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• Required cables and connecting methods differ depending on the cable/satellite box.
For more information, please contact your cable/satellite provider.
• Instead of using video out jack of this unit, you can also use S-VIDEO OUT jack, COMPONENT VIDEO OUT jack, or
HDMI OUT jack (DVD only)(no audio out jack connection required) for connecting to your TV.
With this setup:
• You can record any unscrambled channel by selecting the channel on the cable/satellite box. Be sure that the
cable/satellite box is turned on.
• You cannot record one channel while watching another channel.
rear of this unit
OUT
DVD/VCR
S VIDEO N - - AUDIO -- OUT
L L
N
ANTENNA
R R
N
IN - VIDEO UT
ANTENNA
RF coaxial
This connection is
cable
through only
ANT. IN
RCA audio
cable
R L
AUDIO IN
RCA video cable
RCA audio
cable
OUT
cable/satellite
IN
box
RF coaxial
cable
for TV loop
rear of your TV
RF coaxial
R L
VIDEO OUT
AUDIO OUT
RF OUT ANT. IN
cable
or
EN EN
satellite
dish
cable TV
company
17 17