FLEX
Turning the headset on and off
Turn on the headset
Press and hold the answer button for 2-3 seconds. Release the button when the
LED flashes green and a short beep is heard in the speaker.
Turn off the headset
Press and hold the answer button for 2-3 seconds. Release the button when the
LED flashes red 3 times.
FLEX
Pairing
Prior to using the headset, it must be »paired« with another Bluetooth device, such
as a mobile phone. For specific instructions, check the users guide of your phone.
General procedure
• Activate Bluetooth on your phone
• Put FLEX bizz in pairing mode (check so that the headset is switched off, press
and hold the answer button for 4-5 seconds until the LED flashes red and green)
• Perform a search for bluetooth devices on your phone
• Connect to »FLEX bizz« when found. The PIN code is 0000 (four zeros)
Different phones have different ways to handle Bluetooh devices. Read the users manual
of your phone for more info. Some phones will connect to the headset automatically when
it is within range, for example when you return to your office. For other phones, it may be
necessary to reconnect manually when the connection has been broken.
The headset can be paired with more than one phone, but it can only be connected to one
phone at a given moment.
UK-3
FLEX bizz