Sony STR-DE400 Service Manual page 5

About the indicators on the display
1 2 3 4
;
SP DIGITAL
LFE
SW
SLEEP OPT COAX
L C R
SL S SR
qd
qf
Name Function
A SW
Lights up when sub woofer
selection is set to "YES"
and the audio signal is output
from the SUB WOOFER jack.
B LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C SP
Lights up when the receiver is
turned on. This indicator does
not light up if a headphone is
connected to the PHONES jack.
D ;DIGITAL
Lights up when Dolby Digital
signals are input.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to "ANALOG".
E ;PRO
Lights up when the receiver
LOGIC (II) applies Pro Logic processing to
2 channel signals in order to
output the center and surround
channel signals. "; PRO
LOGIC II" lights up when the
Pro Logic II Movie/Music
decoder is activated.
However, both indicators do not
light up if both the center and
surround speakers are set to
"NO" and "A.F.D. AUTO",
"DOLBY PL", "PLII MV", or
"PLII MS" is selected.
Note
Dolby Pro Logic and Dolby Pro
Logic II decoding do not
function for DTS format
signals.
F DTS
Lights up when DTS signals are
input.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is not set to
"ANALOG".
G MEMORY
Lights up when a memory
function, such as Preset
Memory, etc., is activated.
5 6
;
PRO LOGIC II DTS
qs qa
Name
H Preset
station
indicators
I Tuner
indicators
J D.RANGE
K COAX
L OPT
M SLEEP
N Playback
channel
indicators
L
R
C
SL
SR
S
RDS
MEMORY
D.RANGE STEREO MONO
q; 9
Function
Lights up when using the
receiver to tune in radio stations
you have preset. For details on
presetting radio stations.
Lights up when using the
receiver to tune in radio stations,
etc.
Note
"RDS" appears for models of
area code AEP, UK only.
Lights up when dynamic range
compression is activated.
Lights up when INPUT MODE
is set to "AUTO" and the source
signal is a digital signal being
input through the COAXIAL
jack, or when INPUT MODE is
set to "COAX IN".
Lights up when INPUT MODE
is set to "AUTO" and the source
signal is a digital signal being
input through the OPTICAL
jack, or when INPUT MODE is
set to "OPT IN".
Lights up when the sleep timer
is activated.
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound (based on the speaker
settings).
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Output channel: When surround
speaker is set to "NO".
Sound Field: A.F.D. AUTO
SW
L C R
SL SR
STR-DE400
7
8
5