LG LTCS24223B /04 Service Manual page 7

Slightly lift up the refrigerator door and remove it.
Middle Hinge Bracket
Fig. 14
Turn the freezer door upside down on a non-scratch
surface. Loosen the screw to remove the Door Closer/Stop
and Hinge Pin Insert.
Door Closer / Stop
Fig. 15
Move the Hinge Pin Insert Bracket to the other side of the
door, keeping the same orientation, and move the Hinge
Pin Insert into the hole on the left side of the bracket.
Fig. 16
Reverse the Door Closer/Stop by flipping it over. Place it on
top of the Hinge Pin Insert Bracket, and tighten both down
with the screw.
Fig. 17
Hinge Pin
Hinge Pin Insert
Hinge Pin
Insert Bracket
Pry off the cover on the top left side of the refrigerator to
uncover the screw holes. Set the freezer door and top hinge
parts to the side and remove the refrigerator door.
Fig. 18
REVERSING THE REFRIGERATOR DOOR
Using a 1/4 in socket wrench, loosen and remove Hinge Pin
from the Middle Hinge Bracket. Remove washer under-
neath the middle hinge and set aside.
NOTE: At this point the door will be loose. Slightly lift the
door and remove it
Fig. 19
Fig. 20
- 7 -
Cover
(on top of
refrigerator)