Quick Start Guide
¿ ì Ë Ù ² Ù × ÷ Ö ¸ Ä Ï
1
Hard Disk/DVD Recorder
3 Video/Audio cable
2 RF
coaxial
cable
(yellow/red/white)
b
e
Connect the existing Antenna/Cable TV signal (or from the Cable
Box/Satellite Receiver {RF OUT or TO TV} to the ANTENNA IN
jack on the recorder.
b
Use the supplied RF coaxial cable to connect the ANTENNA OUT
on the recorder to the ANTENNA IN jack on your TV (VHF/UHF
RF IN).
c
Use the supplied audio/video cable (yellow plug) to connect the
VIDEO (CVBS) OUTPUT jack on the recorder to the VIDEO IN
jack on your TV.
d
Use the supplied audio/video cable (red/white plugs) to connect
the AUDIO OUTPUT jacks on the recorder to the AUDIO IN jacks
on your TV.
e
Connect the power cable from the recorder to an AC power outlet.
Helpful hint:
please see page 16-23 of user manual for more connections.
4
Remote control and
two AAA batteries
CABLE
SATELLITE
c/2d
ANTENNA
3
Press STANDBY-ON on the recorder.
Turn on the TV and other connected devices (e.g. Cable
Box, Satellite Receiver).
3b
Set it to the correct video-in channel. You should see the
blue DVD background screen.
3c
Press SETUP and press
Press
key to select the options needed and press OK.
3d
Move cursor to "SETUP MENU - GENERAL" option, then
press
key. Press
keys to highlight "Auto Scan" option
and press OK to search for stations.
3e
Move cursor to "SETUP MENU - DATE/TIME" option, then
press
key. Press
keys to select "Date (dd/mm/yyyy)"
option. Press
key to change the setting and press OK.
DVDR3588H
keys for moving preview.