Whirlpool LCR5232DQ0 Use And Care Manual page 6

To disconnect washer:
l
Unplug the electrical power cord and put it
back in its storage area.
l
Turn the water faucet off.
l
Press the red water flow button to release
the water pressure.
l
Move the locking collar down and pull the
hose connector down to disengage from
the faucet adapter.
l
Drain water from the hoses through the
hose connector.
l
Hang the hoses on the storage rack.
Locking
Water flow
\
Hose
button
connector
Portable two-faucet connections
If you have two separate water connections,
your washer can be connected to both the hot
and cold water faucets using Kit #3430190.
This kit can be purchased from your Whirlpool
Dealer.
Connecting the washer:
l
Connect the hot and cold water inlet hoses
to the hot and cold faucets.
l
Secure the drain hose to the sink or
standpipe.
l
Slowly turn the water faucets on all the
way.
l
Plug the power cord into a 3-prong
grounded outlet.
To disconnect the washer:
l
Unplug power cord and return it to the
storage area.
l
Turn water faucets off.
l
Disconnect the drain and water supply
hoses. Hang them on the storage rack.
6