Product Diagram; Adding Water; How To Use - TaoTronics TT-AH008 User Manual

Product Diagram

⑴ Nozzle
⑵ Water Tank Lid
⑶ Water Tank Handle
⑷ Water Tank
⑸ Filter
⑹ Water Inlet Cap
⑺ Cleaning Brush
⑻ Tank LED Light
⑼ Air Inlet
⑽ Power Cable
⑾ Pour Side
⑿ Safety Lock
⒀ Base
⒁ LED Display
⒂ Touchpad
⒁
⒂

Adding Water

• Turn the safety lock counter-clockwise by 90 degrees to unlock the
⑴
water tank.
⑵
• Remove the water tank lid, lift the water tank from the base, and place it
upside down to access the water tank cap.
⑶
• Rotate the tank cap counterclockwise to remove the cap and add
clean water into the tank. Make sure water does not over ow.
Note: Please rotate the cap gently; do not screw with too much force to
⑷ avoid hurting your hand or the product.
• Put the cap back on the tank and screw clockwise to lock in place. Stop
twisting when no water comes out.
• Put the water tank back on the base.
• Turn the safety lock by clockwise 90 degrees to lock in place.
⑸

How to Use

⑹
• Power on the humidi er. The unit now is in standby mode and the current
relative humidity (RH) will be shown on the display. You can operate the
humidi er through:
⑺
⑻
⑼
⑽
⑾
⑿
⒀
03/04