SERVICE MANUAL K-LED24FHD2N/B MT23A-AP 1. Caution 2. Specification 3. Alignment Procedure 4. Block Diagram 5. Scheme Diagram 6. PCB Layout 7. Trouble Shooting 8. Explode Diagram 9 BOM List This manual is the latest at the time of printing, and does not...
SCHNEIDER ELECTRONICS GMBH-GERMANY 1. CAUTION CA UTION: Use of controls, adjustments or procedures other than those specified herein may result in hazardous radiation exposure. CA UT ION : T O RE DUCE TH E RIS K OF CA U T ION ELECTR ICA L SHOCK, DO NOT RE MOVE COVER (OR BACK).
SCHNEIDER ELECTRONICS GMBH-GERMANY IMPORTANT SAFETY INSTRUCTIONS CAUTION: Read all of these instructions. Sa ve these instructions for later use . Follo w all W arnings and Instructions marked on the audio equipment. 1. Read Instructions-All the safety and operating instructionsshouldbe read before the productis operated. 2.
Page 4
SCHNEIDER ELECTRONICS GMBH-GERMANY PROTECTION AND LOCATION OF YOUR SET Do not use this television set near water ... for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. Never expose the set to rain or water. If the set has been exposed to rain or water, unplug the set from the wall outlet and refer servicing to qualified service personnel.
Page 5
SCHNEIDER ELECTRONICS GMBH-GERMANY OPERATION OF YOUR SET 18. This television set should be operated only from the type of power source indicated on the marking label.If you are not sure of the type of power supply at your home, consult your television dealer or local power company. For television sets designed to operate from battery power, refer to the operating instructions.
LCD TV SPECIFICATION RELEASE Version: V1.0 Issued Date: 2010.07.08 Model: K-LED24FHD2N/B/MT23A-AP PICTURE Panel Size (inch) 23.6" LCD TV(LED Backlight) Category Aspect Ratio 16:9 Color Temperature Normal/Warm/Cool SIGNAL FORMAT CAPABILITY Energy saving/Normal/Sunshine Backlight Adjustable & ALC(Adaptive Luma Control) Component Video Format...
TCL-CRT CRT/SJ/FK02-2010 Alignment Procedure Version V6.0 PREPARED BY : chunyu han/yajian li /junzan gong DATE: 2010-12-17 APPROVED BY : DATE:...
Page 8
TCL-CRT CRT/SJ/FK02-2010 Record Of Revision: Version Date Page Description V4.0 2010/08/09 3;4;6 3;11 PRODUCTION add GAMMA and NVM data are revision V5.0 2010/8/27 Version V5.0 2010/8/27 V6.0 2010-12-13 V6.0 2010-12-13 No S-VIDEO function for MT23C chassis V6.0 2010-12-13 V6.0 2010-12-13 4A-LCD24E-CM1 /4A-LCD26E-AU1/ 4A-LCD26E-BK1...
TCL-CRT CRT/SJ/FK02-2010 LCD display ntegration of VIDEO and PC;It has high quality picture, little cubage, little weight, energy saving and ;little rays The way to enter Factory Mode Method one move the cursor to “Contrast” item then press the “9”, “7”, “3”, “5” keys continuously on RC Method two...
TCL-CRT CRT/SJ/FK02-2010 3.1 Software part number should be made reference to the latest BOM. 3.2 You see software version on the screen when enter the factory Mode. CPU: V8-0MT2311-LF1V*** ( software version) DAT:XXXXXX ( software edit date) The adjustment for the tv. Device.
Page 15
TCL-CRT CRT/SJ/FK02-2010 Table 6-1 Source select On: It support this source; NOTE: No S-VIDEO function for MT23C chassis Table 6-2 AUTO AUTO On/Off TV’s color system select On: It support this system; On/Off Off: It does not support this PAL-M NTSC358 On/Off system...
Page 16
TCL-CRT CRT/SJ/FK02-2010 SECAM On/Off /////// On/Off ////// On/Off Table 6-3 AUTO AUTO On/Off TV’s color system select On: It support this system; On/Off Off: It does not support this PAL-M NTSC358 On/Off system PAL-N NTSC443 On/Off NTSC358 SECAM On/Off NTSC443 On/Off SECAM On/Off...
Page 18
TCL-CRT CRT/SJ/FK02-2010 Eye care for sale in domestic market ROWA” brand “ Set On for MT23C chassis sale in domestic market . On,, If speaker change to 42-35716F-XX0G will be set Off. sale in domestic market Chip list of software programming Position Chip type Software description...
Page 19
TCL-CRT CRT/SJ/FK02-2010 A Please ensure the software you are using has a correct file name. The name is “mt23lf”; B Insert the USB disk to the USB socket of the set for which you are going to upgrade program. C,Enter the Menu, select SW UPDATE of APP, press button of remote control to start upgrade.
Page 20
TCL-CRT CRT/SJ/FK02-2010 Project ID start administer for 131 Version of TCL P/N Project ID NVM DATA IVO_M236MWF1 CLI_T6V511 AUO_T260XW06 CMO_V315B6_L01 AUO_M185XW01_V6 AUO_M185XW01_VD CMO_V236H1_LE2 4A-LCD24E-CM1 AUO_T260XW06_V2 4A-LCD26E-AU1 4A-LCD26E-BK1...
Page 21
TCL-CRT CRT/SJ/FK02-2010 131 version of revision project ID NVM date 1. Since ,If using back version of 131 front version of NULL* is no using.
Page 26
C906 R924 0.01U 100R R925 0.01U C908 DD-MM SBU : 100R TCLNO: DD-MM R926 C909 01-0MT23C-MAB2XG KALLEY ELECTRODOMESTICOS DD-MM BOGOT D.C. SUPPORT & QUALITY DD-MM DESIGNATION ENG. SERGIO E. MANCERA -CHECKED- Index-Lab DATE NAME DESCRIPTION Last modif DRAWN CHECKED PAGE:...
Page 29
Power OK, backlight OK,no picture Check the voltage of Replace R270 pin ‘s’ of q208 and R271 Check the voltage of ‘g’ of Check the output of Q208 Q208 OR replace Q208 Measure the wave of Check the supply of U201 LVDS signal Replace panel...
Page 30
TV no picture Measure the wave Check the voltage of repair the circuit of of pin 8,9 of U1 pin 6 ,7 of u1 U101 and Q102 Check the circuit measure the wave of between U1 and Check the U201 SDA and SCL U201 Replace u1...
Page 31
AV no picture Upgrade Software of U202 ok? Replace Check the components the bad between AV port and U201 Replace Check U201 ok? U201 VGA/YPbPr no picture Check the peripheral components of U201 Check the components between Replace VGA/YPbPr port and U201 the bad Replace the bad...
Page 32
Picture OK, all source no sound Check the voltage of Repair the 12v supply pin 3,13 of U602 Check the pin 6 of u602 Check q607,q608,q609 Check the pin 7 of u602 repair R691 and R692 Check the wave of PIN 4,12 of U602 check u601 and volume control Replace U602 or replace...
Page 33
Standby +5.0VSB OK, +5.0V NG Check the voltage of Check before Q305 pin ‘s’ of q305 Check the voltage of ‘g’ of Check the output of Q305 Q305 OR replace Q305 Check U303,U304 short to Gnd Replace the bad...
Page 34
The picture bad Replace the wire from P202A to t-com Replace the Replace panel chassis Check the circuit between p202a and U201 Upgrade the software...
Need help?
Do you have a question about the K-LED24FHD2N/B and is the answer not in the manual?
Questions and answers