Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2016 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 16d
Advertisement
Table of Contents
Summary of Contents for FASTEN-PRO 63160
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. For technical questions, please call 1-888-866-5797. Page 2 Item 63160... -
Page 3: Electrical Safety
6. Keep cutting tools sharp and clean. Properly risk of starting the power tool accidentally. maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. For technical questions, please call 1-888-866-5797. Item 63160 Page 3... - Page 4 Moving the tool to a new location. 25. Avoid unintentional starting. Prepare to begin work before turning on the tool. 14. Do not make any modifications to this tool. For technical questions, please call 1-888-866-5797. Page 4 Item 63160...
- Page 5 If any abnormal as tingling, numbness, and white or blue fingers), vibration occurs, stop use immediately. seek medical advice as soon as possible. SAVE THESE INSTRUcTIONS. For technical questions, please call 1-888-866-5797. Item 63160 Page 5...
- Page 6 6. If you are using an extension cord outdoors, make 150% of the rated amperes. sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use. For technical questions, please call 1-888-866-5797. Page 6 Item 63160...
-
Page 7: Specifications
18 gauge – 7 /16" crown x 5/16", Accepts Staple Size ® 3/8", or 1/2" long, or Arrow T50 Accepts Nail Size 18 gauge x 9/16" long 3/8" Staples (Quantity 400) Included Accessories 9/16" Nails (Quantity 100) For technical questions, please call 1-888-866-5797. Item 63160 Page 7... -
Page 8: Safety
Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 14. Functions power Handle cord Magazine Lock Trigger Magazine Safety pusher Assembly Nosepiece For technical questions, please call 1-888-866-5797. Page 8 Item 63160... -
Page 9: Operation
The tool must not cycle (fire). If it fails to act in the manner explained in bold, have it repaired by a qualified service technician. For technical questions, please call 1-888-866-5797. Item 63160 Page 9... - Page 10 Do not load staples and nails together. Refer to Figure B. Figure B 3. Slide the Pusher assembly back into the Stapler/Nailer until the Magazine Lock snaps securely in place. Refer to Figure C. Figure c For technical questions, please call 1-888-866-5797. Page 10 Item 63160...
- Page 11 Store indoors out of children’s reach. cAUTION! TO pREVENT INJURy: Do not hold tool near body while firing. Tool recoil can cause injury. For technical questions, please call 1-888-866-5797. Item 63160 Page 11...
-
Page 12: Maintenance
Assembly. Refer to Figure A. serviced by a qualified technician. 2. Carefully remove any jammed fasteners from the discharge area with needle- nose pliers (sold separately). For technical questions, please call 1-888-866-5797. Page 12 Item 63160... -
Page 13: Troubleshooting
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. For technical questions, please call 1-888-866-5797. Item 63160 Page 13... -
Page 14: Parts List And Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. For technical questions, please call 1-888-866-5797. Page 14 Item 63160... - Page 15 Assembly Diagram For technical questions, please call 1-888-866-5797. Item 63160 Page 15...
-
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.