Philips MCD755 User Manual page 12

Connections
B
Viewing and listening to the playback of
other equipment A
●
Connect the system's AUX IN (R/L) jacks to
the AUDIO OUT jacks on the other audio/visual
device (such as a TV, VCR, Laser Disc player or
cassette deck).
Before starting operation, press SOURCE on
the front panel to select AUX or press AUX on
the remote in order to activate the input source.
Recording (digital) B
●
Connect the system's COAXIAL or
OPTICAL jack to the DIGITAL IN jack on a
digital recording device (such as DTS-Digital
Theatre compatible, with Dolby Digital decoder).
Before star ting operation, set the DIGITAL OUT
according to the audio connection. (See
"DIGITAL OUT".)
Using the VCR for recording DVDs C
●
Connect one of the system's VIDEO jacks to
the corresponding VIDEO IN jack and LINE
OUT (R/L) jacks to the AUDIO IN jacks on
the VCR. This will allow you to make analogue
stereo (two channel, right and left) recordings.
12
VIDEO IN
C
AUDIO IN
R
VCR
L
AUDIO OUT
L
R
A
Television
Connecting to a TV with HDMI Jack E
HDMI connects untouched and uncompressed
digital transmission for the highest and crispest
sound/image quality.
It has plug and play capability using only one
cable for both audio/video output.
●
Use a HDMI cable (not supplied) to connect the
HDMI jack on the DVD Player to HDMI IN
on a HDMI compatible device (e.g.; TV, Projector,
Adaptor).
➜
It may take a while for the DVD player and
input device to communicate and initialise.
➜
Playback starts automatically.
HDTV
HDMI IN
Notes:
– Proceed to "Setup Menu Options"
➜
SETUP PAGE" "HDMI SETUP" for detailed
HDMI setup.
– If you are using the HDMI as audio source
make sure that "SPDIF OUTPUT" is set to "SPDIF/
PCM" (see "Setup Menu Options"
➜
SETUP PAGE" "SPDIF SETUP").
– To stop sound output from your TV after
making the HDMI connection, make sure that
"SPDIF OUTPUT" is set to "OFF" (see "Setup
➜
Menu Options" "AUDIO SETUP PAGE"
"SPDIF SETUP").
E
HDMI IN
➜
"VIDEO
➜
"AUDIO
➜