Advertisement
2.
Install or update the PC software
Before the data logger can be set up, you
must install the software on your PC. To
download, visit easylogcloud.com and
select the Product Software link. This
software installation also includes the WiFi
Sensor Firmware Updater (see next step).
The data logger may already be displaying
a reading, but it will not be configured or
connected to your WiFi network until set up
is complete.
3.
Update the data logger firmware
Run the WiFi Sensor Firmware Updater and
follow the on-screen instructions.
You should always install the latest PC
Software to ensure you can connect with the
latest devices, access the most up-to-date
features and communicate effectively with
the Cloud.
You should always install the latest firmware
to ensure the device contains the latest
features.
F
Advertisement
