LG 32LC2D(B) Service Manual page 14

3) Connect RS232 cable(Use Download Jig and general RS-
232C Twisted Serial Cable).
*Before upgrading "Hudson flash memory", push the switch
on the download jig 'inside'.
4) Operate LGIDS.
5) Select "Hurricane" and "ALL" on Model dialog and check
your connection in Communication dialog.
(If your connection is 'NG', then set your PORT (COM1, 2,
3,...) correctly. If your connection has completed, you can
Ready
see )
6) First, select proper Batch file(*.flm) for each model at [ROM
Download] => [Batch File].
Second, select proper RAM file(*.hex) for each model at
[ROM Download] => [RAM File].
Third, select roper Flash File(*.hex) for each model at
[ROM Download] => [Flash File].
7) Click the [Download] button.
It means the completion of the Hudson download if all
items show 'OK' and Status is changed by 'PASS' at the
lower right corner of the window.
Before AV ADC Calibration, should be executed the
"Panel size selection
5. Select method of Panel size
5.1 Press ADJ Key in the Adjust remocon
5.2 Select "Panel Control" by using ▲/▼ (CH+/-) key, and
press (ENTER)
5.3 Select "Panel Size", and change the panel size among
32, 37, 42 according to the inch of model name.
(If the model name is 37LC2D-EC, change the Panel size
from default value to 37.)
5.4 After changing the panel size, push the EXIT Key
6. ADC Calibration
ADC RF/AV/S-VIDEO
MSPG925F PAL
INPUT SELECT
Model: 202 (PAL-BGDHI)
Pattern: 33
PAL 100% Color Bar
=> Caution: -System control RS-232 Host should be "PC" for
adjustment.
Before AV ADC Calibration, execute the "Panel size
selection"
- 14 -
Component
Model:217 (720P)
AV4 Pattern:33
720P/60Hz 100%
Color Bar
RGB-PC
Model: 37
(1024*768
60Hz)
Pattern: 33