Table of Contents
Advertisement
Quick Links
Note: seek-button refers to the Wonderbar or Town & Country button on a
signal seeking radio. In AM/FM mode this button will only control the
radio seek function, not the Bluetooth/USB.
Bluetooth® is a registered trademark of the Bluetooth SIG
AAC trademark used under license from Via Licensing
All other trademarks are those of their respective owners
Aurora Design LLC. ©2014-17 Rev 2.2a 2/17
!
Aurora Design
Bluetooth/USB/AAC/MP3 Adapter
User Operation
Manual
BTU-2
Advertisement
Table of Contents
Related Manuals for Aurora Design AAC/MP3
Summary of Contents for Aurora Design AAC/MP3
- Page 1 In AM/FM mode this button will only control the radio seek function, not the Bluetooth/USB. Bluetooth® is a registered trademark of the Bluetooth SIG AAC trademark used under license from Via Licensing All other trademarks are those of their respective owners Aurora Design LLC. ©2014-17 Rev 2.2a 2/17...
- Page 3 Congratulations on your new Aurora Design BTU-2 Bluetooth/USB/ Specifications: AAC/MP3 adapter. Combined with an FMR-2 converted radio, you can enjoy 21 century technology in your classic vehicle! Bluetooth Transceiver*: Frequency Band: 2.40-2.48GHz Setup: Your radio may have come equipped with an internal Standard: Bluetooth 4.1, Class 2...
- Page 4 LED will illuminate to signify a Bluetooth device is connected. A Voice Assist message will also be heard in the radio when a Bluetooth Aurora Design LLC. does not assume any responsibility for personal device successfully connects. injury or property damage incurred due to hazardous driving as a result of interaction with the BTU-2 or other Bluetooth devices.
-
Page 5: Troubleshooting
Troubleshooting: long. Names such as Darryls’ 65 Mustang will personalize your radio and make it easier to identify if you own multiple FMR/BTU radios. Place this Poor Range: Make sure nothing is obstructing the dial face of the radio, file on a USB drive and connect to the BTU-2. The BTU-2 will update its or the openings along the bottom side of the radio chassis. - Page 6 twist the tuning control towards the low frequency end of the dial or USB File Structure: The USB drive must be formatted in FAT12, quickly press the optional pushbutton/seek-button twice. A Voice Assist FAT16 or FAT32 format using a MBR Primary partition. The name of the message will be heard to confirm the setting.
Need help?
Do you have a question about the AAC/MP3 and is the answer not in the manual?
Questions and answers