Configuring The Musiccast Network; Registering Supported Devices To The App - Yamaha WXAD-10 Owner's Manual

Configuring the MusicCast network

If you have multiple devices that support MusicCast (called "supported devices"
in this manual), you will be able to easily configure a home audio network using
MusicCast CONTROLLER. After registering the unit to the app, register other
supported devices to the app.
To register the unit to the app, refer to "Connect to the network." on page 6.
Registering supported devices to
the app
1
(Settings)
Standard Mode and Extend mode
If you make a wired connection between a supported device and the wireless
LAN router (access point), you can expand the reception range (Extend mode).
This will be useful if you want to install a supported device in a location where
reception is poor.
If you want to play high-resolution audio sources, a wired connection is
recommended.
Standard Mode: Wireless connection to the access point
Extend mode: Wired connection to the access point
3
Done
2
Follow the app
instruction to register.
12
Wireless LAN router Supported device
(Access point)
Wireless LAN router Supported device
(Access point)
This unit
This unit