Driver Installation - OEM PD7000 User Manual

Step 3:
For PD7000 customer pole display with RS232 interface, connect the RS232 cable to
the computer. Connection requires power DC5V, 750mA.
For PD7000 customer pole display with USB interface, connect the USB cable to the
the computer. Connection requires power DC5V, 750mA.
Step 4: Turn on the computer, the display will be on and show a self-diagnostic status.
There will be slides (full-screen pictures and half-screen pictures) displayed on the monitor.
The resolution of full-screen picture is 800X480ppi, half-screen picture's is 400X480ppi.

4. Driver Installation

For PD7000 customer pole display with RS232 interface, there is no need to install
driver, it can work directly after turning on the computer (jump to the test).
For PD7000 customer pole display with USB interface, it requires installing USB to
PL2303 driver.
Installing steps:
Step 1: Run and install "PL2303_Prolific_DriverInstaller_v1.8.0" program.
Follow the installation guide, click "Finish".
Picture format: JPG BMP
4