Canon EOS REBEL T7I Basic Instruction Manual page 69

The <A> mode makes the colors look more impressive in nature, outdoor,
and sunset scenes. If you do not obtain the desired color tones, change the
mode to a Creative Zone mode and select a Picture Style other than
<D>, then shoot again (p.109).
FAQ
The focus indicator <o> blinks and focus is not achieved.

• Aim the Area AF frame over an area with good contrast, then press
the shutter button halfway (p.45).
• If you are too close to the subject, move away and shoot again.
• Change the AF area selection mode and shoot again (p.96). The
default setting is Automatic selection AF.
When focus is achieved, the AF points do not light up in red.

The AF points light up in red only when focus is achieved in low light
or with a dark subject.
Multiple AF points light up simultaneously.

Focus has been achieved at all those points. You can take the
picture as long as an AF point covering the target subject is lighting
up.
A Fully Automatic Shooting (Scene Intelligent Auto)
Take the picture.
4
Press the shutter button completely to

take the picture.

The captured image will be displayed
for approx. 2 sec. on the LCD
monitor.
When you finish shooting, push down

the built-in flash with your fingers.
67