Fan Power Connectors; Front Panel Connectors; Chassis Intrusion Connector - MSI 760GMA-P34 FX series Manual

MS-7641
Fan Power Connectors: CPuFAN, SySFAN, SySFAN2
the fan power connectors support system cooling fan with +2V. When connect-
ing the wire to the connectors, always note that the red wire is the positive and
should be connected to the +2V; the black wire is Ground and should be con-
nected to GNd. if the motherboard has a System hardware Monitor chipset on-
board, you must use a specially designed fan with speed sensor to take advantage
of the CPu fan control.
CPuFAN SySFAN SySFAN2
Front Panel Connectors: JFP, JFP2
these connectors are for electrical connection to the front panel switches and
Leds. the JFP is compliant with intel Front Panel i/o Connectivity design
®
Guide.
JFP2
JFP
Chassis intrusion Connector: JCi
this connector connects to the chassis intrusion switch cable. if the chassis is
opened, the chassis intrusion mechanism will be activated. the system will record
this status and show a warning message on the screen. to clear the warning, you
must enter the BioS utility and clear the record.
2