Advertisement
Important!
– This set can only be operated after the
supplied DIN cable has been connected.
Tips
– See the User Manual for other TV
connection options.
– For connecting to a Progressive Scan
TV, refer to the user manual for proper
connections and detailed setup.
TV
Right Speaker
Subwoofer
1
3
4
Setting up the TV
1
Press
SOURCE (DISC
2
Turn on the TV and set it to the correct Video In channel.
– –
Speakers
Black
White
1
5
AC Power Cord
2
ANTENNA
FM
(75Ω)
FM wire antenna
on the remote) to select disc source.
1
Connect the speaker wires of the right speaker and subwoofer to the
left speaker.
2
Connect the supplied FM wire antenna.
3
Connect the left speaker and the DVD player by using the supplied
DIN cable.
4
Connect the DVD player to your TV using the supplied composite video
cable.
5
Connect the AC power cord to the wall socket.
+
A To listen to TV channels through this system, use the
Red
audio cable (white/red, not supplied) to connect
Green
AUX IN (L/R) jacks to the corresponding AUDIO
OUT jacks on the TV set.
●
Before starting operation, press AUX on the
remote control to select "AUX" to activate the
input source.
B To listen to disc playback of this system through TV,
use the audio cable (white/red, not supplied) to
connect LINE OUT (L/R) jacks to the corresponding
AUDIO IN jacks on the TV set.
TV
OUT
IN
B
DVD player
A
Advertisement
