Parts Checklist Side panel (Left) x 1 Locking cams x 14 Locking pins x 14 Side panel (Right) x 1 Screws x 2 Base x 1 Phillips key x 1 Front 30mm End panel x 1 Tray divider x 1 Down Down...
Page 3
Insert locking pins to right side panel Screw the 7 locking pins all the way into the threaded holes. Do not overtighten or you may damage the thread. phillips key Fit the end panel Insert 4 locking cams into the end panel. Push each cam all the way into the hole.
Page 4
Fit the tray divider Insert 4 locking cams into the tray divider. Push each cam all the way into the hole. Use the phillips key to rotate the locking cams so the ‘+’ and ‘-’ face toward the end of the panel. Fit the tray divider to the side panel.
Page 5
Fit the base to the side panel Gently lower the base onto the side panel. Use the phillips key to tighten the 3 lower locking cams by rotating them clockwise. IMPORTANT - Note the correct 30mm direction of the base panel. Use the phillips key to tighten the locking cams (turn clockwise to tighten).
Page 6
Insert locking pins to the left side panel Screw the 7 locking pins all the way into the threaded holes. Do not overtighten or you may damage the threads. Fit the left side panel Align all the locking pins and carefully attach the side panel.
Page 7
Fitting the change tray to the chest of drawers This change tray is designed to be used in conjunction with the Tasmaneco chest of drawers. We recommend securing the change tray to the chest of drawers using the two screws provided.
Page 8
6. The item is transferred, gifted or disposed of by the original owner to another. Registration and Claims To be eligible for the above Guarantees, the original owner must register their details online at www.tasmaneco.com.au immediately upon receipt of the product.