Turn Your Device On And Off - LG LS970 Sprint User Manual

Tethering and Hotspot Active - Indicates that both USB tethering and Portable
Wi-Fi hotspot are active.
Portable Wi-Fi hotspot Active - Indicates that Portable Wi-Fi hotspot is active.

Turn Your Device On and Off

Turn your device on and off and wake-up the screen by using the Power/Lock Button .
Turn Your Device On
► Press and hold the Power/Lock Button .
Once your phone is on, it may display ―Searching for Service.‖ When your phone finds a signal,
it enters standby mode – the phone's idle state. At this point, you are ready to begin making and
receiving calls.
If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is
automatically activated. When a signal is found, your phone automatically returns to standby
mode.
In Power Save mode, your phone searches for a signal periodically without your intervention.
You can also initiate a search for Sprint service by pressing any key (when your phone is turned
on).
Tip: The Power Save feature conserves your battery power when you are in an area where
there is no signal.
Turn Your Device Off
1. Press and hold the Power/Lock Button for two seconds until you see the powering-
down animation on the display screen.
2. Tap Power off and then tap Yes to power off the device.
Your screen remains blank while your phone is off (unless the battery is charging).
Wake Up the Screen
If you don't use the device for a while, the screen and backlight will shut off to conserve battery
power.
1. Press the Power/Lock Button . Your lock screen will appear. See
2. Swipe the screen to any direction to unlock it. The last screen you were working on
opens. (This is the default lock screen.)
Device Basics 13
Set Up Screen Lock.