WHAT’S IN THE BOX? Evo Aqua case Instruction guide Dummy phone Opening key Cleaning cloth OPENING YOUR EVO AQUA Open the SecureClip at the bottom of your case. Insert the supplied opening key into the allocated slot as illustrated and twist to release the back cover.
Seals Acoustic vents Fingerprint membrane 3. Press the dummy down firmly into your case as illustrated. On the top of your case’s back-plate, you’ll notice three SecureHooks. Insert these hooks into the slots on the back side of the front cover. Using your thumbs, press these hooks WATER TEST firmly up into their slots.
Page 4
10.When all the clips are engaged securely, visually inspect the main seal and ensure that there’s nothing obstructing it. Repeat this at the bottom of your case, making sure that the clips on either side of the SecureClip, and the clips on each corner of your case, are engaged securely.
DEVICE INSTALLATION Press your phone down firmly into your case. Remove any screen protectors and/or cases and clean your phone using the supplied cleaning cloth. Rotate the mute dial on your case to make sure that it engages correctly with the mute switch on your phone.
Repeat this at the bottom of your case, making sure that the clips on either side Follow handset manufacturer’s of the SecureClip, and the clips on each instructions to reprogram the Touch ID corner of your case, are engaged securely. on your phone.
We recommend that you remove your and you agree to indemnify tech21 for any phone from your case on a weekly basis unintended use or misuse by a minor. and check for any moisture build-up from the environment.
Page 8
EVO AQUA the warranty period is required. Tech21’s Evo Aqua for iPhone 7 Plus has been designed for use with an iPhone 7 Plus only. It is not recommended to use it with any other YOU’LL NEED TO KNOW...
Need help?
Do you have a question about the EVOAQUA and is the answer not in the manual?
Questions and answers