Summary of Contents for Leader 726HS
- Page 1 Multi-Function Memory Telephone with Headset & On Hook Dialling Leader 726HS Instruction Manual please read this manual before using this unit...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety or covered.The openings should never be blocked precautions should always be followed to reduce the by placing the product on a bed, sofa, rug, or other risk of fire, electric shock and injury to persons, similar surface.This product should never be placed near or over a radiator or heat register.This product including the following:... - Page 3 IMPORTANT SAFETY INSTRUCTIONS CONTINUED... 10. Unplug this product from the wall outlet and refer: technician to restore the product to normal operation. A. When the line cord is damaged or modular plug is damaged or frayed. E. If the product has been dropped or the cabinet has been damaged.
-
Page 5: Features And Functions
FEATURES AND FUNCTIONS 14. Wall Mounting Tab (under handset) - Lift and rotate to the wall 1. Base Unit mountlng position, if desired. See installation for wall-mount use. 2. On Hook Dial/Headset Button - Press tc initiate the on-hook dialling or headset (when headset had been plugged into the 15. -
Page 6: Packing List
PACKING LIST 1. Connecting the handset: Use the coiled handset cord to 1 handset and 1 base unit connect the handset to the base unit. Do not use any handset 1 coiled handset cord other than your original handset. 1 plastic wall mounting bracket 1 user’s manual (read carefully and save) 1 3m line cord mod to mod 1 P608M plug... - Page 7 WALL MOUNTING WITHOUT STANDARDWALL PLATE 3. Battery compartment: Batteries are not required. Memory retention is permanent when connected to the line. When (1) Mount two screws in the wall spaced according to the template disconnected memory retention is 30 minutes. on the margin of this page.
- Page 8 OPERATING INSTRUCTIONS Automatic Gain Control Switch. Ensure switch is on 4. Receiving a Call. position P to suppress any high gain transmit and receive When the phone rings, simply lift or echo which can be experienced with some PABX or handset and answer the call.
- Page 9 To store a number, lift handset off hook and press STORE 4: If your phone is connected to a PABX in Example to begin storing operation, followed by pressing the phone the office which requires dialling 0 to access number desired (this number won’t be dialled). End storing outside line, you can store a phone number sequence by pressing STORE again, following by the 02-844-6123 in the #2 two-touch memory.
- Page 10 10. Headset Operation. These instructions are to be used If the handset is being used and the headset is required in addition to the instruction book and on the assumption to be used, press the Headset “on hook button”, then the handset is already connected, ready to use.
- Page 11 IF YOU HAVE PROBLEMS If your telephone does not work properly, go through the 3. If the telephone’s volume level drops, or it begins to make following check list before you spend unnecessary time and strange sounds, or does not dial out even though a dial money for repairs.
-
Page 12: Specifications
SPECIFICATIONS Redial Memory Capacity 32 digits (TONE Dialling) ............Memories Capacity (10 Direct + 10 Indirect) .
Need help?
Do you have a question about the 726HS and is the answer not in the manual?
Questions and answers