Physical Layout of the Base Station Physical Layout of the Reader LASER LIGHT, DO NOT STARE INTO BEAM (DataMan 8 DataMan 8000 Quick Reference Guide DataMan 8000 Quick Reference Guide...
Overview of Setting Up the Reader Install DataMan 8000 Software Refresh COM ports or Network devices COM port or a Network devices Connect RS-232/USB connection Ethernet connection...
Page 7
Start the Setup Tool Reader Quick Setup Connect to Reader Results Display Light and Imager Settings/ UltraLight Settings System Settings...
Page 8
Use the Setup Tool Menu Bar Edit View Tasks System System Menu File File Menu Help...
Connecting a DataMan 8000 through Ethernet Troubleshooting an Ethernet Connection Refresh Enable DHCP your DataMan Add Device or Force Network Settings Add Device Force Network Settings Network devices Reser Scanner to Factory Defaults...
Page 10
Connecting a DataMan 8000 through RS-232 Reserved your DataMan VCC PWR DO NOT...
Page 11
Keyboard Emulation with Keyboard Keyboard Emulation without Keyboard...
Page 12
Keyboard Emulation with Wireless Keyboard Emulation with Wireless Reader using Keyboard Reader without Keyboard...
Connecting a DataMan 8000 through USB Using your Device through USB to your...
Page 14
Connecting to a Wireless DataMan 8000 through a Base Station your DataMan Power...
Page 15
Wireless Connections (continued) NOTES Base Connect to Reader in the Setup Tool Connection Station Channels Connection Type RS-232 Base Station appears: COM port terminal program (Wireless reader does not appear) Base Station appears: COM port 1 terminal program Wireless reader appears: COM port 2 Setup Tool Ethernet Base station appears: Network device 1...
Base Station Routing Capabilities Wireless Reader: Buffering Data reader read ader ONLY IF NOTE never RS-232/ base station base tation Ethernet NETWORK...
Page 17
Wireless Reader: Buffering Data (Continued) Base Station Con- How to Connect nection Type RS-232 Connect to the COM port of the base station. Connect to the COM port of the wireless reader. Ethernet Connect to the terminal program using the IP address of the Con- nect to Reader pane and hover your mouse over the reader.
Summary of Wireless Buffering Indicators Wireless Reader: Charging Condition Status Indicator: Status Indicator: Base Sounds Reader Station Reader in wire- When the reader is Reader out of the base Good read: 1 beep (default) less range of blinking blue station and reader is No read: no beep (default) base station indicates wireless...
Page 19
Wireless Reader: Charging (Continued) Condition Status Indicator: Reader Status Indicator: Base Station Battery low connection Reader is charging in the base station indicator Reader is fully charged in the base station indicator...
Map of Field of View and Reading Distances 396 mm (15.5 in) 312 mm (12.2 in) 154 mm (6.06 in) 33 mm (1.29 in) 5 mil 75 mm (2.9 in) 10 mil 210 mm (8.2 in) 20 mil 374 mm (14.7 in) 7 mil 215 mm (8.4 in) 13 mil 409 mm (16.1 in)
Agency Compliance Statements: DataMan 8000 Agency Compliance Statements: DataMan Base Station Series Readers Regulator Canada FCC Class A Compliance Statement for the DataMan Base Station 54 DataMan 8000 Quick Reference Guide DataMan 8000 Quick Reference Guide...
Page 29
Agency Compliance Statements: DataMan Base Station (Continued) Canadian Compliance C-Tick Statement European Compliance 56 DataMan 8000 Quick Reference Guide DataMan 8000 Quick Reference Guide...
Page 30
Agency Compliance Statements: DataMan Base Station (Continued) For European Union Users 58 DataMan 8000 Quick Reference Guide DataMan 8000 Quick Reference Guide...