Advertisement
1
Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
A
Place the center speaker above or close to the TV.
B
Place the subwoofer on the floor, at least one meter
away from the TV.
C
Place the front speakers at equal distances from the
TV.
D
Place the rear speakers at the back or beside the
listening position.
B
Connect the main unit to TV
VIDEO IN
(CVBS)
Television
(rear)
VIDEO IN
(CVBS)
DOCK
VIDEO OUT
Pr
Y
Main Unit (rear)
Pb
COAXIAL
S-VIDEO
Connect a composite video cable (supplied) from the
CVBS jack on the main unit to the VIDEO IN jack on
your TV.
Note It is important to connect the main unit
directly to your TV.
hts3548_93_qsg_eng2_final.indd 2
hts3548_93_qsg_eng2_final.indd 2
C
Connect the speakers and
subwoofer
A
Connect the tall speakers, secure it with the supplied
screw using the Allen key.
B
Connect the various colored plugs from the
speakers and subwoofer to the same colored jacks at
the rear of the main unit.
REAR
REAR
FRONT
RIGHT
LEFT
LEFT
FRONT
RIGHT
SUBWOOFER
FRONT CENTER
Main Unit (rear)
D
Connect the radio antennas and
power cable
Keep the antennas away from the electronic devices to
prevent unwanted interference.
A
FM antenna
C
Main Unit (rear)
B
AM/MW antenna
A
Connect the FM antenna to the inner pin of the
FM 75
jack. Extend the wire for optimum
reception.
B
Unfold the AM/MW loop antenna and fix the claw
into the slot. Push the tabs and insert the wires into
the AM/MW jacks.
C
Connect the power cable from the main unit to the
AC power outlet.
E
Connect audio output from TV
(optional)
To hear the TV audio through this home theater system,
use a red and white audio cables (not supplied) to
connect the AUDIO IN-TV jacks on the main unit to the
AUDIO OUT jacks on your TV.
Television
AUDIO
OUT
( rear)
AUDIO OUT
AUDIO
OUT
AUDIO IN
Main Unit (rear)
Note Press TV on the remote control to get the
sound output from the speakers system when watching
the TV programs.
2
Set up
A
Finding the viewing channel
Press 2 (STANDBY ON) on the main unit to turn
A
it on.
B
Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
STANDBY-ON
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
°
control repeatedly (or AV, SELECT,
button) until
you see the Video In channel.
B
Select the display language on the
screen
A
Press SETUP.
The { General Setup Page } appears.
General Setup Page
Disc Lock
English
Display Dim
Program
OSD Language
Screen Saver
Sleep
DivX(R) VOD Code
SETUP
B
Press
to select { OSD Language } and press
.
C
Use
keys to select a language option in the
menu and press OK to confirm.
D
Press SETUP to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this Home
Theater system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preference Setup) available on this Home Theater
System. Refer to the user manual for more information.
2008-05-02 10:02:33 AM
2008-05-02 10:02:33 AM
Advertisement
