Do you have a question about the 043-6117-6 and is the answer not in the manual?
Questions and answers
Rachel Angiletta
March 28, 2025
Water sensor pin is stuck indife
1 comments:
Mr. Anderson
March 28, 2025
To fix a stuck water sensor pin on a Garrison 043-6117-6 dehumidifier, follow these steps:
1. Unplug the unit: Always disconnect power before servicing.
2. Locate the float sensor: Open the water tank compartment and locate the float mechanism (a small plastic arm or pin that moves up and down with the water level).
3. Inspect for debris or buildup: Check if dirt, mold, or mineral deposits are preventing the float from moving freely. Clean the float and surrounding area with warm water and mild soap.
4. Free the stuck float: Gently move the float up and down by hand. If it's stuck, carefully wiggle it until it moves freely. Do not force it, as it may break.
5. Check for damage: If the float or pin is broken or deformed, it may need replacement.
6. Reassemble and test: After cleaning and ensuring the float moves freely, reinsert the water tank, plug in the unit, and test operation.
If the float still does not move or the unit shows a full tank error when empty, the float sensor may be faulty and need professional repair or replacement.
This answer is automatically generated
Pierre
March 6, 2025
Where can I buy a plastic turbine for my dehumidifier.
Nacole McGrath
February 4, 2025
Where can I buy a blower wheel for my Garrison Dehumidifier? Part #522303
Need help?
Do you have a question about the 043-6117-6 and is the answer not in the manual?
Questions and answers
Water sensor pin is stuck indife
To fix a stuck water sensor pin on a Garrison 043-6117-6 dehumidifier, follow these steps:
1. Unplug the unit: Always disconnect power before servicing.
2. Locate the float sensor: Open the water tank compartment and locate the float mechanism (a small plastic arm or pin that moves up and down with the water level).
3. Inspect for debris or buildup: Check if dirt, mold, or mineral deposits are preventing the float from moving freely. Clean the float and surrounding area with warm water and mild soap.
4. Free the stuck float: Gently move the float up and down by hand. If it's stuck, carefully wiggle it until it moves freely. Do not force it, as it may break.
5. Check for damage: If the float or pin is broken or deformed, it may need replacement.
6. Reassemble and test: After cleaning and ensuring the float moves freely, reinsert the water tank, plug in the unit, and test operation.
If the float still does not move or the unit shows a full tank error when empty, the float sensor may be faulty and need professional repair or replacement.
This answer is automatically generated
Where can I buy a plastic turbine for my dehumidifier.
Where can I buy a blower wheel for my Garrison Dehumidifier? Part #522303