Getting started................3 Device layout....................3 ON / OFF......................4 Charging the battery..................5 Settings....................6 Settings on the FlyNet ................6 Settings on PC / MAC / Linux..............6 Settings on a mobile device...............7 Settings using Logfly..................7 GPS tracks..................8 GPS track download on PC / MAC / Linux........8 GPS track download on a mobile device.........8...
Getting started ON / OFF To turn the FlyNet ON, press and hold the Device layout ON/OFF button (for about 2 seconds). › Front view FlyNet beeps, and the LED turns ON. After a few seconds, the LED will flash ON and OFF (50/50).
99 seconds. TakeOffSpeed speed threshold for the automatic takeoff and landing detection in Kph. 0=GPS records as soon as FlyNet is switched on. Recommended value is 8. 0=GPS data are not transmitted via Bluetooth, 1=GPS data are transmit- SendGpsInfo ted via Bluetooth.
GPS track download using Logfly the micro USB cable, (appear as an USB drive). Open Logfly and select the GPS button on the top left, click select GPS and choose FlyNet. A green light appears on the right if the FlyNet is connec- Logfly, is a great PC / Mac logbook app you can download, from our ted and a setting logos on the left.
USB cable (appears as an USB drive). Open the Logfly app, and click on the GPS button (top left), select GPS and choose FlyNet. If there is a new version available, Logfly will ask, if you want to update your firmware (click yes).