Basic Connections
Step 4: Connecting FM/MW
antennas
fix the claw
into the slot
➠
MW
1
antenna
Pr
Y
Pb
1
Connect the supplied MW loop antenna
to the MW socket. Place the MW loop
antenna on a shelf, or attach it to a stand
or wall.
2
Connect the supplied FM antenna to the
FM socket. Extend the FM antenna and
fix its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far as possible
from your TV, VCR or other radiation source
to prevent unwanted interference.
10
001-045-HS 3300-93-Eng2
(continued)
Step 5: Connecting the
FM
antenna
2
2
After everything is connected
properly,
1
Set the VOLTAGE SELECTOR to the
local power line voltage.
2
Plug in the AC power cord to the power
outlet.
The red Eco Power LED on the DVD
system will light up. Never make or
change any connections with the power
switched on.
Helpful Hint:
– Refer to the type plate on the rear or
bottom of the system for identification and
supply ratings.
10
power cord
TV
1
DVD system
VOLTAGE SELECTOR
Pr
Y
L
Pb
R
at the bottom of
the DVD system
14/04/2005, 01:52 PM