Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ARG ARG-2.4R
Summary of Contents for ARG ARG-2.4R
- Page 1 Part #ARG-2.4R Manual and User Guide User Guide Part #ARG-OM-32 – Rev C Updated: 1/5/2017 Audio Resource Group, Inc. • 405 Main Ave W, Unit 4G • West Fargo, ND 58078 • ©2016 Audio Resource Group, Inc. • All Rights Reserved •...
- Page 2 9. Auto Power and 3.5mm Audio Jack MOUNTING INSTRUCTIONS: The ARG 2.4GHz Receiver is a universal unit designed to be compatible with most makes and models of cardio equipment. To mount the Receiver: Determine the appropriate location to mount the receiver to the cardio equipment. Take note the range of motion of the components of machine and make sure the placement of the receiver and its cabling will not interfere with operation of the machine or any safety features.
- Page 3 This will restart the software and should return the unit to normal operation. If problems persist, please contact your dealer or ARG for further assistance. Audio Resource Group, Inc. • 405 Main Ave W, Unit 4G • West Fargo, ND 58078 • ©2016 Page 3 Audio Resource Group, Inc.
- Page 4 HEADPHONE JACK REPLACEMENT: Because it is subject to heavy use, it is normal for the contacts in the headphone jack assembly to wear out over time. The 2.4Ghz receiver is equipped with a replaceable headphone jack module to address this wear without replacing the entire unit.
- Page 5 SETTING COPY: New ARG receivers have the ability to copy settings from one unit over to another unit. This greatly speeds up programming multiple units as it takes approximately one minute to copy all settings. To copy from one unit to another the optional copy module is required. (ARG-PM03).
- Page 6 On the master receiver locate the small button in the headphone jack compartment. Press this button once. ARG Audio recommends using a paperclip for this. Programming start button At this point the backlight on both the master and slave receiver will turn on. This means that the copying has started.
- Page 7 Warranty does not include normal wear and tear on the product or any other physical damage unless the damage was the result of a manufacturing defect. ARG is not liable for consequential damages due to any failure of equipment to perform as intended.
- Page 8 If it is necessary to return your system for service, you must first be issued a Return Authorization Number (RMA) by our Customer Service Technician prior to sending the system to ARG. All returns must be prepaid by the sender (no freight collect shipments will be accepted). Make sure to clearly mark the RMA number on the outside...
Need help?
Do you have a question about the ARG-2.4R and is the answer not in the manual?
Questions and answers