Simulation Interface And Reset Button - Qianglongsheng Electronic Technology MCD-DEMO-II Manual

DEMO-II Copyright of Qianlongsheng Electronics Technology (Shenzhen) Co., Ltd.

4.5 Simulation Interface and Reset Button

Simulation interface is reserved for user to connect MCD2 to a simulator. The interface completely follows
MCD2/ICD2 interface requirement, user may need to do no changes when using it. It is shown in Figure 4-6.
Reset button is used to reset the MCU, as shown in Figure 4-7.
Figure 4-6 Simulation interface
Simulation Interface and reset button schematics are shown in Figure 4-8.
K1 RE SET
J2
6
5
4
3
2
1
ICS P
Figure 4-8 Simulation interface and reset button schematics
Figure 4-7 Reset button
R2
470 R
RB 7
RB 6
RB 3
Page 17 of 33
VC C
R3
47K
VPP
VC C