Philips HTS3152/51 Quick Start Manual page 2

1 Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
A
Place the centre speaker above or close to the TV.
B
Place the subwoofer on the floor, at least one metre
away from the TV.
C
Place the front speakers at equal distances from the
TV.
D
Place the rear speakers at normal listening ear level.
B Connect the main unit to TV
Television (rear)
VIDEO IN
(CVBS)
VIDEO IN
(CVBS)
SPEAKERS
AM/
MW
Main Unit (rear)
VIDEO OUT
Pr Y
Connect a composite video cable (supplied) from the
CVBS socket on the main unit to the VIDEO IN
socket on your TV.
Note It is important to connect the main unit
directly to your TV.
C Connect the speakers and
subwoofer
Connect the various coloured plugs from the speakers
and subwoofer to the same coloured sockets at the rear
of the main unit.
SUBWOOFER
FRONT CENTRE
FRONT FRONT REAR REAR
RIGHT LEFT RIGHT LEFT
Main Unit (rear)
SPEAKERS
AM/
MW
D Connect the radio antennas and
power cable
Keep the antennas away from the electronic devices to
prevent unwanted interference.
AM/MW antenna
B
SPEAKERS
AM/
MW
FM antenna
A
C
A
Connect the FM antenna to the inner pin of the
FM 75 socket. Extend the wire for optimum
reception.
B
Unfold the AM/MW loop antenna and fix the claw
into the slot. Push the tabs and insert the wires into
the AM/MW sockets.
C
Connect the power cable from the main unit to the
AC power outlet.
E Connect audio output from TV
(optional)
To hear the TV audio through this home theatre system,
use a red and white audio cables (not supplied) to
connect the AUDIO IN-TV sockets on the main unit to
the AUDIO OUT sockets on your TV.
AUDIO
Television
OUT
(rear)
AUDIO OUT
OUT AUDIO
AUDIO IN
SPEAKERS
AM/
MW
Main Unit (rear)
Note Press TV on the remote control to get the
sound output from the speakers system when watching
the TV programmes.
2 Set up
A Finding the viewing channel
Press 2 (STANDBY ON) on the main unit to turn
A
it on.
B
Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
STANDBY-ON
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
°
control repeatedly (or AV, SELECT, button) until
you see the Video In channel.
B Select the display language on the
screen
A
Press SETUP.
The { General Setup Page } appears.
General Setup Page
Disc Lock
English
Display Dim
Program
OSD Language
Melayu
Русский
Screen Saver
ไทย
Sleep
DivX(R) VOD Code
SETUP
B
Press to select { OSD Language } and press .
C
Use keys to select a language option in the
menu and press OK to confirm.
D
Press SETUP to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this Home
Theatre system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preference Setup) available on this Home Theatre
System. Refer to the user manual for more information.