Zenith Z-150 User Manual page 119

Page 3.3ti
Operations
Configuring the System
The Z-lOO PC Series Computers may be connected to many different
~~)
types of printers. modems. and other devices which make use of either
a Centronics parallel signal or RS-232 serial signals. This section will show
you how to use the CONFIGUR utility of MS-DOS to customize your
operating system for use with different devices.
CONFIGUR will guide you through each phase of selecting the necessary
conditions to hook up your printer and telephone modem (or other
peripheral).
NOTE:
Some peripherals. not sold by Zenith Data Systems. may require
the fabrication of custom cables for proper operation.
CONFIGUR
Parallel Printers
As
your personal computer is delivered. it is ready to be connected and
used with a parallel printer.
If you are going to use a parallel printer, all you need to do is plug
it into the parallel port as shown in Figure 3.1.
Be
sure to use the proper
cable.
~~L------------~~L,'-rr"----------~·~~I