Page 2
NORTH AMERICAN TOLL FREE : 1 (855) 230 - 4008 NORTH AMERICAN TOLL FREE : 1 (855) 230 - 4008...
Page 3
Table of Contents Dear Customer: Please follow the user manual in order to achieve the optimal performance for the lifetime of your machine. TOPIC DESCRIPTION PAGE NUMBER What’s in the box External Appearance Major Technical Parameters Transport and Storage Startup and Temperature Regulations 4 - 5 Safety and Precautions Cable Requirements...
Page 4
CONTACT INFORMATION What’s in the box PHONE : (905) 230 - 4008 This SunStar Appliance should come with everything on the list below. Please contact the number on page 10 of the manual if NORTH AMERICAN TOLL FREE : 1 (855) 230 - 4008 something is missing.
Page 5
Available Capacity operate for 2 hours prior to food storage 2) DO NOT turn the unit on within 5 minutes after a sudden power C4P14CF DC 12V/24V 400L failure or disconnect. Wait at least 10 minutes to 30 minutes prior to 14 cu/Ft powering the unit up again.
Page 6
TRANSPORT AND STORAGE Troubleshoot Chart 1) When loading and unloading the unit, the angle of inclination should not exceed more than 45° in any direction while loading or transportation. Please try to keep the unit steady when in transit. (See Figure 1). FIGURE 1 2)The unit should be placed away from direct exposure to sunlight.
START UP & TEMPERATURE GENERAL ISSUES & REGULATIONS TROUBLESHOOTING 1) START UP 1) In case of an abnormal operation, please refer to the a) Turning the power on, the red indicating light on the Troubleshooting chart shown on page 8 for temperature control panel will light up (See Figure 4 on inspection and possible solutions.
FIGURE 4 CABLE REQUIREMENTS To ensure the correct start and operating conditions for the unit, the following cable dimensions must be observed: Cross-section (mm Max. Length between battery and compressor module (m) SAFETY PRECAUTIONS 12V/DC 24V/DC 2.5 (10 AWG) 1) Use an independent 12V/24V DC outlet with a capacity of no 4 (6 AWG) less than 12A.
Need help?
Do you have a question about the C4P14CF and is the answer not in the manual?
Questions and answers