JB Systems FAZE-700 Operation Manual
JB Systems FAZE-700 Operation Manual

JB Systems FAZE-700 Operation Manual

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for JB Systems FAZE-700

  • Page 3: Before Use

     Equipped with a self-cleaning system  Extremely reliable  Uses normal Fog Fluid. (JB Systems Standard or Hi-Tech Fog Liquid) BEFORE USE  Before you start using this unit, please check if there’s no transportation damage. Should there be any, do not use the device and consult your dealer first.
  • Page 4 [F001] to [F005]: activates the continuous fog output. Use the Up and Down buttons to select the desired fog output:  [F001] = lowest output  [F005] = highest output 2. REMOTE CONTROL INPUT: Used to connect the supplied remote controller. JB SYSTEMS FAZE-700 ®...
  • Page 5: Operating Instructions

    If you don’t want to produce fog anymore and decide to switch off the unit; wait for about 1 minute so the total cleaning is finished before to switch the unit off or before to disconnect the unit from the mains. JB SYSTEMS FAZE-700 ®...
  • Page 6: Maintenance

    +/- 1400 cubic ft/min Warm up time: 3 min Tank size: 1,2L Recommended Fluid: JB Systems Standard or Hi-Tech Fog Liquid Size: 300 x 147 x 290 mm Weight: 5 kg All the information is subject to change without prior notice You can download the latest version of this user manual on our website: www.jb-systems.eu...

Table of Contents