Table of Contents
Advertisement
RealCare Baby® 3
Quick Start Guide
Congratulations!
You now own the most realistic and technologically
advanced infant simulator in the world. To get started,
you will need at least one RealCare Baby, Control
Center Software and XStick. Reference steps
below to start your program.
Assemble these items:
1. Baby wearing yellow patch diaper and
two-piece outfit*
2. Sleepwear, infant bodysuit and green
patch diaper*
3. Bottle and/or breastfeeding device
4. One Student ID with wristbands used to
identify parent to Baby
5. Single Charger OR 5-Baby Charger
(Single Charger pictured)
6. XStick® Wireless Communication Adapter
2
*All clothing items contain sensors so Baby can track which articles of clothing it is wearing
and for how long.
NOTICE! RealCare® Control Center Software, participant video and
curriculum available at:
www.realityworks.com/realcaredownloads
3
4
1
5
6
1
Advertisement
Table of Contents
Summary of Contents for Reality Works RealCare Baby 3
- Page 1 RealCare Baby® 3 Quick Start Guide Congratulations! You now own the most realistic and technologically advanced infant simulator in the world. To get started, you will need at least one RealCare Baby, Control Center Software and XStick. Reference steps below to start your program. Assemble these items: 1.
- Page 2 GETTING STARTED Charge Baby Connect Baby to a Single Charger (one Baby) or 5-Baby Charger. For best results, charge overnight. A full charge takes four to six hours. NOTICE! BABY BATTERY MAINTENANCE Important charging advice for optimizing Baby’s battery life: •...
- Page 3 Install Control Center Software and Set Up Wireless Communication www.realityworks.com/realcaredownloads 1. Visit, to download your software. Follow software installation instructions. 2. Plug the USB end of the XStick into a USB port on your computer. 3. Launch Control Center Software. Add Babies to Control Center When Control Center Software starts, it displays the Main Screen.
- Page 4 START A SIMULATION On the Main Screen, check the box for each Baby to be programmed. Select Program Baby at the top. On the Program Baby Screen, use the Previous Next buttons to toggle between Babies. Assign Student ID Before starting a simulation, Baby needs to be assigned a Student ID. This unique identification number on each ID allows Baby to recognize and record the caregiver’s performance.
- Page 5 3. Clicking New Class opens the Add Report Folder dialog window. 4. Enter the new folder name into the text field. The class folder name can be no longer than 15 characters (letters, numbers, and spaces). 5. Click to save the folder name. Assign Student and Baby Names (optional) A student and Baby name can be assigned for each new simulation.
- Page 6 START A SIMULATION (continued) Select Schedule Order (optional) A specific schedule order or care level must be selected for the simulation before it starts. There are 15 schedules to choose from, each ranked easy, medium or hard. A listing of the schedule numbers can be found in your RealCare curriculum.
- Page 7 Send Program to Baby 1. When done entering program data, click Done. Baby status will change to active. 2. Review Program Baby – Summary Screen. 3. Click Send to Baby(s). Baby will chime indicating program was received. 4. Simulation will begin at chosen start day and time. To review Baby program details, click on the Active icon on the sidebar.
- Page 8 NEED MORE HELP? Additional Help and Information Complete User Guide Complete programming and reporting instructions can be found in the Help section of Control Center Software. Online Product Support We’re here to help! Our online Product Support features video tutorials, downloadable documents, frequently asked questions and product notices, all of which make it easy for you to get support for products, software and more, day or night.