Remove any dust or water off in the pin and contacts of the power plug. (Brenna only) An electric shock or fire may occur as a result. In the case the power cord is damaged, do not replace the cord yourself. Call Hi-Tech Service Center to have it replaced. (Brenna only) Otherwise, electric shock or fire may occur as a result.
SAFETY INFORMATION PARTS NAME Front / Rear Do not open, repair, or modify the unit. (Brenna only) Otherwise, electric shock or product damage may occur as a result. Sliding lever Power cord Extraction faucet T op cover Cup-touch lever Main water Inlet Warning: If not observed, serious physical injury or property damage may Front cover hose (Orange)
3. Connect the faucet with the adaptor. WATER FILTRATION PROCESS Shall install the adaptor with connector on the cold water pipe. Brenna (HTW-07-B-C) 4. Connect 1/4 inch orange tubing with the connector on the adaptor. 1. Step 2 : Neo-sense filter Flush water through each filter at least 5 minutes before This Neo-Sense filter has the functions to remove particulates, dissolved organic and inorganic Connection.
3. Separate the fitting connected FILTER REPLACEMENT to the filter to replace and then replace the filter. (Separate the fitting using an appropriate tool.) ▶ Filter Replacement Cycle The filter replacement cycle described above is not the filter quality warranty period but the - By changing the filter and connecting the fitting and the hose precisely, check expected cycle (life) that the filter shows its original performance.
Need help?
Do you have a question about the BRENNA HTW-07-B-C and is the answer not in the manual?
Questions and answers