Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Etable ETABLE E1227
- Page 1 Jump Starter Power Bank SAFETY & OPERATION Please retain this leaflet for future reference Instructions must be fully read before operation, paying close to attention to the warning and troubleshooting sections. All areas of instruction booklet must be fully understood before operation of unit...
- Page 2 Features Technical Specification Size L204x W102 x H46.5mm Input 15V - 1A;Micro USB 5V-2A Weight 680g Starting current 300A Cycle life 1000+ Peak current 600A Full charge time 5.6hours Battery Capacity 18000mAh Output USB 2.0 5V – 2.4A/1A; Operating temperature 0°C-60°C 19V–3.5A;12V–10A ;...
- Page 3 Operation LED torch • Hold down the power switch (5) for 3 seconds to turn on the torch. • Four modes of LED light (3) can be navigated through by lightly pressing on the power button (Normal, SOS, Strobe and Off). Charging mobile devices •...
- Page 4 from the battery terminals. This must be done within 30 seconds of the vehicle being started. 5. Turn unit off to preserve battery and store within provided carry case to ensure safe storage.
- Page 5 Smart cable user guide...
- Page 6 Warnings 1. WARNING: When unit is turned on and jump leads are connected, never touch metal part of clamps through smart cable has short circuit protection. 2. Make sure the correct battery clamps are connected to the correct battery terminal. 3.
-
Page 7: Troubleshooting
Troubleshooting Q. How does one turn the jump starter device off ? A. The device will turn off automatically when there is no load or when the charging is complete. Q. How many times can the device be used to jump start the automobile with a full charge ? A.
Need help?
Do you have a question about the ETABLE E1227 and is the answer not in the manual?
Questions and answers